what depth sounders are being used on the albin trawlers I have a 36 1983 Albin and the dead rise is about 27 degrees which will not allow me to install the Faria depth guage I ordered... thanks
Kevin G
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Depth sounder
-
kjg1951
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
-
tego
- Gold Member
- Posts: 454
- Joined: Thu May 09, 2013 2:22 pm
- Home Port: Cherokee Resort and Marina - Tellico River near Vonore, TN
- Location: Maryville, TN
Re: Depth sounder
Kevin, You'll have to use a tapered block inside and outside to mount a vertical DS transducer. It's not difficult at all. It would be a lot easier to explain over the phone than to print out here. Give me a call @ (865)233-3621. I've installed more than a hundred on boats from 35' to 200'. Ben
-
CHB
- Gold Member
- Posts: 12
- Joined: Tue Mar 11, 2014 11:09 pm
- Home Port: East Greenwich, RI
- Location: East Greenwich, RI
Re: Depth sounder
I have a 1989 36' DC. When I purchased the boat 4 years ago, I installed Garmin 4212's at each station. The next season, I installed an Aimar DT800V-20° NMEA 2000 depth transducer in place of the aft head overboard discharge seacock. The transducer is supposed to function at angles up to 24 deg. I left the original Datamarine depth transducer and electronics in place as they were functioning fine and now we have a redundant backup depth system. The new unit seems to agree pretty well with the Datamarine system. I didn't purchase dedicated displays for the new depth sounder. The depth is shown on the Garmin displays.