• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Turbo Boost Gauge installed

Post Reply
User avatar
gerber30
Gold Member
Gold Member
Posts: 80
Joined: Wed Jun 24, 2009 9:23 pm
Home Port: Fort Pierce, FL

Turbo Boost Gauge installed

Post by gerber30 »

Installed a turbo boost gauge the other day. Nice unit from Seaboard Marine and an easy install. Exhaust temp gauge is next...
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2004 31 TE w/ twin 370 Cummins (current)

Previous Boat
'97 28 TE w/2005 Yanmar
"Marianne"
sweetwater
Gold Member
Gold Member
Posts: 159
Joined: Fri Mar 25, 2011 9:06 am
Home Port: Oakdale
Location: Long Island South Shore

Re: Turbo Boost Gauge installed

Post by sweetwater »

Can you describe the install briefly? Id like to do the same.
User avatar
gerber30
Gold Member
Gold Member
Posts: 80
Joined: Wed Jun 24, 2009 9:23 pm
Home Port: Fort Pierce, FL

Re: Turbo Boost Gauge installed

Post by gerber30 »

The kit from Seaboard Marine included everything needed. Gauge, tubing and fittings. You will first need to determine where you need to take the boost reading from depaending upon your engine make. Usually there will be a plug there, you just remove the plug and install the fitting provided in your kit. Then run the plastic tubing from there to where you will mount the gauge. The tubing connects to the gauge, the power needed is to illuminate the gauge. I just tied into one of my existing gauges for the illumination power. Attached pics show recommendations for Cummins 6BTA from Seaboard and an actual photo of one of my engines with the fitting and tubing. One of the easier upgrades to do...
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2004 31 TE w/ twin 370 Cummins (current)

Previous Boat
'97 28 TE w/2005 Yanmar
"Marianne"
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Turbo Boost Gauge installed

Post by RobS »

gerber, good post, thanks!

Mike, the best spot to read boost on the 6LP will be to remove, drill and tap one of these plugs up near the air heaters. That is a much easier place to work than down at the combo block on the side of the engine where you would also have to get involved with metric vs. standard threads adapters or re-tapping.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
sweetwater
Gold Member
Gold Member
Posts: 159
Joined: Fri Mar 25, 2011 9:06 am
Home Port: Oakdale
Location: Long Island South Shore

Re: Turbo Boost Gauge installed

Post by sweetwater »

Thanks folks! winter project:0 You guys have boost readings for a baseline, so you know what's good or bad?
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Turbo Boost Gauge installed

Post by RobS »

sweetwater wrote:Thanks folks! winter project:0 You guys have boost readings for a baseline, so you know what's good or bad?
Printed max spec is 2.2 kg/cm2 which google was kind enough to convert to 31.29 psi. Cruise boost would be in the mid-teens to mid-twenties.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: Turbo Boost Gauge installed

Post by jleonard »

A very rough "rule of thumb" for boost is 1 psi per 10 horsepower meaning a 250 hp engine would make approx. 25 psi of boost.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
socalmike
Gold Member
Gold Member
Posts: 152
Joined: Mon Sep 28, 2015 5:23 pm
Home Port: san diego

Re: Turbo Boost Gauge installed

Post by socalmike »

RobS wrote:gerber, good post, thanks!

Mike, the best spot to read boost on the 6LP will be to remove, drill and tap one of these plugs up near the air heaters. That is a much easier place to work than down at the combo block on the side of the engine where you would also have to get involved with metric vs. standard threads adapters or re-tapping.

Rob. Would that mean remove the bolt shown, drill and tap the bolt for the sensor to fit? Please elaborate. Thanks. Mike.
sailingzeus
Gold Member
Gold Member
Posts: 12
Joined: Sun Jul 14, 2013 11:34 am
Home Port: St. Augustine, Fl

Re: Turbo Boost Gauge installed

Post by sailingzeus »

Yanmar 6LPA spec is 24.94 psi maximum boost pressure, for those interested.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Turbo Boost Gauge installed

Post by Norseman »

What is the purpose of a turbo boost gauge on a small vessel like an Albin 28TE?
1) Help trouble shoot a problem?
2) Set power more accurately?
3) Early warning of a turbo going bad?

Just curious, I like gauges too but drilling and tapping into a perfectly good engine may not be my cup of tea.
Is a pyro gauge more or less useful than a turbo boost gauge?
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
elad9000
First Mate
First Mate
Posts: 50
Joined: Sat Mar 18, 2017 12:12 pm
Home Port: Stuart FL

Re: Turbo Boost Gauge installed

Post by elad9000 »

I also purchased the kit from Seaboard Marine only I preferred the combo gauge instead. Mounted it aft of shift lever fore of the trim tab controls.

For Boost Pressure I spliced into the turbo actuator line with a barbed tee.

For ETG Probe there is a plug at the base of the turbo that can be removed. Still have to tap the threads.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Dale Purdy
enJOYCEment
2000 28 TE 1800 hrs
Stuart, FL
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Turbo Boost Gauge installed

Post by Norseman »

elad9000 wrote: Fri Jul 05, 2019 4:49 pm I also purchased the kit from Seaboard Marine only I preferred the combo gauge instead. Mounted it aft of shift lever fore of the trim tab controls.

For Boost Pressure I spliced into the turbo actuator line with a barbed tee.

For ETG Probe there is a plug at the base of the turbo that can be removed. Still have to tap the threads.
Nice, let me know how it works out?
(Is that you Greg? If not, there must be several Albin 28TE guys in Stuart)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Turbo Boost Gauge installed

Post by Norseman »

Contacted Seaborne Marine about the dual gauge and asked about a pod installation? No such option. (I am out of real estate on the dash, pod only on top)
Searched Google for a 3” pod to mount the gauge, no cigar, 2” or 2-3/8” is available.
This came up on the search: Triple gauge with a pod, but my boat is not going to look like a souped up Mustang..
https://www.amazon.com/GlowShift-Pyrome ... way&sr=8-7

Will keep searching, boost and pyro in a combo gauge could be useful
for a nerd like me.. 8)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Sisu22
Gold Member
Gold Member
Posts: 312
Joined: Sun May 07, 2017 6:50 pm
Home Port: Ventura, CA

Re: Turbo Boost Gauge installed

Post by Sisu22 »

Would also be interested to know how people use this. Obviously the EGT reading could be useful if it increases drastically, but for boost do you use that to find an efficient cruse?
1994 TE 28' w/ Cummins 250
WillieC
Gold Member
Gold Member
Posts: 2281
Joined: Wed Nov 13, 2013 10:48 am
Home Port: Hood Canal, WA

Re: Turbo Boost Gauge installed

Post by WillieC »

I can't wait to move up to a real boat. You guys have way more stuff to fool around with.
WillieC: Normally aspirated, what's a turbo?, mechanical fuel injection, 36 HP (at least it was 45 years ago), one alternator, one battery (I threw in an extra one, just in case). And a bit over half a gallon per hour.

Actually, I do read all your stuff whether it pertains to the A25 or not because I learn something new almost every time. Thanks!
Post Reply

Return to “Tournament Express 26-35”