• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Oil Pressure
-
RicM
- Gold Member
- Posts: 1209
- Joined: Sat Dec 02, 2006 10:06 am
- Location: Wickford RI
- Contact:
Oil Pressure
I recently changed my oil using Rotella 15-40W. I have noticed that my oil pressure at idle seems lower. What kind of oil pressure do others get at fully warmed idle? I'm running the Yanmar 315 in a 28TE.
Ric Murray
Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
-
chiefrcd
- Gold Member
- Posts: 541
- Joined: Mon Jun 19, 2006 10:29 am
- Home Port: Deltaville, VA
- Location: Deltaville Virginia
- Contact:
I have Japanese gauges, so I can't begin to tell you what the actual reading is...but at idle my oil pressure is in the red 9 basicly zero). No alarms, has always been this way. as I start to increase the rpms....say at about 950 or so my needle begins to move up and if I'm running at high rpms...I'm between 3 and 4 on the gauge, what ever that is. I use Amsoil Marine Diesel 15w40
Albin 28TE "Southwind"
-
SpaceCoaster
- Gold Member
- Posts: 81
- Joined: Wed Aug 30, 2006 12:13 am
- Location: Merritt Island, Florida
- Contact:
Pressure Reading
Chief,
My guess is that your gauge is reading "bars" of pressure. Based on www.onlineconversion.com 1 bar = 14.50 psi. Based on your readings that seems to make sense. I don't recall my pressure at idle off-hand, but at cruise my gauge reads around 4 bar or just under.
Jorge
My guess is that your gauge is reading "bars" of pressure. Based on www.onlineconversion.com 1 bar = 14.50 psi. Based on your readings that seems to make sense. I don't recall my pressure at idle off-hand, but at cruise my gauge reads around 4 bar or just under.
Jorge
Baby Bella
1994 Albin 28TE
(D254 Mercruiser/BMW)
Merritt Island, FL
1994 Albin 28TE
(D254 Mercruiser/BMW)
Merritt Island, FL