Seems after 15 years the magnetron on our Furuno Model 1622 has failed. Questions ...
- Anyone have a good source of replacement magnetrons?
- Is this an easy replacement or is complex tuning required?
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Magnetron
- djpeewee
- Gold Member
- Posts: 133
- Joined: Mon Sep 22, 2014 1:13 pm
- Home Port: Port Angeles/On Driveway
Re: Magnetron
Replace the entire radar. You'll get much better performance from a current generation model.
DJ
TRYGON
28 TE Flush Deck
TRYGON
28 TE Flush Deck
- Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: Magnetron
You may not find one through the usual channels. Can you get a part number for it? If you replace it yourself, be cautious it's all wired correctly as they carry very high voltage.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 228
- Joined: Mon Mar 19, 2007 7:20 am
Re: Magnetron
I do have the part number and the only source I found was suspect (not a dealer, known vendor, repair co.) and quoted a price of $450.
Don