• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Can't get the anchor to go down.

GPS, Sonar, Radar, Fishfinder, etc. Discuss electronics installation and upgrades.
Post Reply
paulamaxim
First Mate
First Mate
Posts: 25
Joined: Wed Mar 18, 2015 3:23 pm
Home Port: Stonington, Maine

Can't get the anchor to go down.

Post by paulamaxim »

We are unable to put down the anchor. We use the up/down switch but there is no response. No motor seems to come on.

What else do we do?

Is there a possible electric issue?

We need to try and fix it before Sunday.

Any help is appreciated!

We have an 1999 Albin 28.
1st Mate Paula Maxim & Capt. Tom Duarte
Top
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: Can't get the anchor to go down.

Post by Serenity »

Did you check the clutch nut on the gypsy? If it is back off too much it won't grip the rode/
Max
Serenity 98 28TE
East Islip, Long Island, New York
Top
User avatar
catalina_mike
Gold Member
Gold Member
Posts: 721
Joined: Mon Mar 09, 2015 11:20 am
Home Port: Dana Point

Re: Can't get the anchor to go down.

Post by catalina_mike »

The main breaker on most is in the dinette for the windless. The up down at the helm (that pulls in the solenoids by the windlass) can be on a separate fuse or circuit if you will. Get a DC voltmeter and get more intell.. Check for 12 vdc.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Top
Post Reply

Return to “Electronics”