• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

cockpit deck construction

Albin's "power cruisers"
Post Reply
changer
Gold Member
Gold Member
Posts: 57
Joined: Sun Apr 24, 2016 11:53 am
Home Port: Hutchinson Island, FL
Location: Harbour Isle Marina

cockpit deck construction

Post by changer »

I have an '85 A27FC. Does anyone know the thickness off the cockpit sole ( aft of engine hatch) and if there is a core ?

thanks, doug
Sprig1
Gold Member
Gold Member
Posts: 390
Joined: Thu Dec 11, 2014 5:05 am
Home Port: Long Cove Marina, Chester River Maryland

Re: cockpit deck construction

Post by Sprig1 »

My 84 has a 1/2 inch balsa coring. I replaced the aft section about 20 inches.
User avatar
tego
Gold Member
Gold Member
Posts: 454
Joined: Thu May 09, 2013 2:22 pm
Home Port: Cherokee Resort and Marina - Tellico River near Vonore, TN
Location: Maryville, TN

Re: cockpit deck construction

Post by tego »

On an '87, the sole is about 3/4" with 1/2" balsa coring. Ben
User avatar
sail149
Gold Member
Gold Member
Posts: 344
Joined: Sun Nov 08, 2009 5:30 pm
Home Port: Stuck at home on trailer! Chesapeake bay intended....
Location: Eastern PA

Re: cockpit deck construction

Post by sail149 »

Check out this thread for lots of talk too
viewtopic.php?f=28&t=7884&start=45
Warren
'84. 27AC. Lehman 4D61
changer
Gold Member
Gold Member
Posts: 57
Joined: Sun Apr 24, 2016 11:53 am
Home Port: Hutchinson Island, FL
Location: Harbour Isle Marina

Re: cockpit deck construction

Post by changer »

Thanks fellows....helpful.... don't have any delimitation that I can feel/see but lots else to do in this area.

doug
Post Reply

Return to “A25 / A27 - True Classics”