• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Surveyor Recommendation
-
- Deckhand
- Posts: 8
- Joined: Mon May 23, 2016 7:24 pm
- Home Port: East Boston, MA
- Location: Boston, MA
Surveyor Recommendation
I am looking for recommendations in the New Bedford - Fall River - Westport (Massachusetts) area. Obviously, Albin experience would be a plus, but there weren't many of this particular boat that were built, so finding a really good motor yacht surveyor is the primary goal.
- JackK
- Gold Member
- Posts: 465
- Joined: Fri Jun 30, 2006 8:14 am
- Home Port: Portsmouth, Rhode Island
- Location: Plainville, MA
Re: Surveyor Recommendation
Jim Hilton
EBCS Marine Surveys
Jim is the brother of Ken Hilton @ Standish Boat Yard. He grew up around Albins. I've met him a few times and he seems very knowledgeable to me.
EBCS Marine Surveys
Jim is the brother of Ken Hilton @ Standish Boat Yard. He grew up around Albins. I've met him a few times and he seems very knowledgeable to me.
former boat .. 2003 28 TE Flushdeck Dogonit
-
- Deckhand
- Posts: 8
- Joined: Mon May 23, 2016 7:24 pm
- Home Port: East Boston, MA
- Location: Boston, MA
Re: Surveyor Recommendation
Dang. Good to know. I talked with Jim but went with Jeff Gonsalves purely for scheduling reasons. Both came highly recommended...
Still looking for an engine surveyor. I got a quote for $400/engine + $400 for the genset + $1.50/mile travel. This is 1.5 times the cost of the pre-purchase marine survey (sea trials included). Is that a typical fee for an engine survey, or is this an "I'm busy make it worth my while" fee?
Still looking for an engine surveyor. I got a quote for $400/engine + $400 for the genset + $1.50/mile travel. This is 1.5 times the cost of the pre-purchase marine survey (sea trials included). Is that a typical fee for an engine survey, or is this an "I'm busy make it worth my while" fee?
- Dr Luke
- Gold Member
- Posts: 48
- Joined: Sun May 29, 2016 10:21 pm
- Home Port: Key Harbor Marina, Waretown, NJ
- Location: Medford, NJ
Re: Surveyor Recommendation
My engine survey was higher than prepurchase survey. Motors were single Cummins and genie. I felt info obtained was well worth it...and it is harder work it look like.
Paul
2000 32+2: Poco Loco
1992 Boston Whaler 23 Walkaround: UnLeashed
2000 32+2: Poco Loco
1992 Boston Whaler 23 Walkaround: UnLeashed
-
- Deckhand
- Posts: 8
- Joined: Mon May 23, 2016 7:24 pm
- Home Port: East Boston, MA
- Location: Boston, MA
Re: Surveyor Recommendation
Ended up buying the boat, last Friday... Would say that both surveyors were well worth their fees. The engine surveyor, Dennis Klodner, has been been working on/with Volvo since they first started importing their marine diesels to the the states... Attn: all MA, RI owners - DePaul Diesel is the shop, now owned and operated by Jaime, who is Dennis's nephew.
Jeff Gonsalves provided a meticulous pre-purchase survey. Also provides captain services, but book early as he is very busy and very good.
Jeff Gonsalves provided a meticulous pre-purchase survey. Also provides captain services, but book early as he is very busy and very good.
-
- Deckhand
- Posts: 8
- Joined: Mon May 23, 2016 7:24 pm
- Home Port: East Boston, MA
- Location: Boston, MA
Re: Surveyor Recommendation
Currently stuck with a boat that doesn't run. The engine surveyor recommended $3000 of maintenance in his report... missed a leaking water pump, one of the aftercoolers is cracked, both heat exchangers are cracked and one of the housings is cracked. Current estimate is $23,000.00 to fix everything!jackmarble wrote:Ended up buying the boat, last Friday... Would say that both surveyors were well worth their fees. The engine surveyor, Dennis Klodner, has been been working on/with Volvo since they first started importing their marine diesels to the the states... Attn: all MA, RI owners - DePaul Diesel is the shop, now owned and operated by Jaime, who is Dennis's nephew.
Jeff Gonsalves provided a meticulous pre-purchase survey. Also provides captain services, but book early as he is very busy and very good.
If I add the cost of the engine survey, I will have paid just over and additional 20% of the sale price.
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: Surveyor Recommendation
Yikes that's a bit of stuff to miss! What kind of Albin?
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
-
- Deckhand
- Posts: 8
- Joined: Mon May 23, 2016 7:24 pm
- Home Port: East Boston, MA
- Location: Boston, MA
Re: Surveyor Recommendation
It is a 1987 48' North Sea Cutter. I think that if you Google it you can still see the listing on Yachtworld.