List of zincs for 97 28te

[Neil]

I'm a little slow.
I left the boat yesterday without my list.
Does anyone have a list of Zinks for a 97 28 te???
Pretty please and thank you
Neil

[Tree]

What engine? I have two on the rudder and one each on the trim tabs. If you have a Yanmar you need six zincs in that and you'll need one for the bow thruster.

[dkircher]

I have a 98 28TE with a Cummins 330 HP engine and a Sidepower Thruster. Here's a list of my zincs:

Albin Zincs

Shaft – 1.5 inch limited clearance collar zinc
Rudder – 5 inch zinc rudder anode
Trim Tabs – 3.75 inch rudder anodes (2)
Side-power bow thruster – SM61180 Side-Power Zinc Anode
Engine pencil zincs – 5/8 inch by 2 inch, ½ inch shaft (3)

[Neil]

Thank you both. I have the peninsular 310 hp.

[Jeremyvmd]

You will have one zinc on the heat exchanger port side to the rear of the boat...big cylindrical thing. On the top of it...I don't have the size as I buy mine from peninsular, but I can measure my spare when im down there again.
Which thruster do you have?
You may have a swingle zinc on the tabs, I do, mine is a 5" on the tabs and the rudder

Edit - added pic. Right side of the engine the big tube by the hinge. If you look there is a bolt on top, that's your zinc on a peninsular

[Neil]

Jeremy
Thank you, I never would have known that was a zink. We just changed our Vetus 25 bow thruster for a Vetus 45. The new 25 dosnt fit.
Thanks for all the help!
Neil

[Jeremyvmd]

as a supporting member you have access to the breakdown of the peninsular motor. Has all the parts listed, worth a quick perusal to just orient yourself. Hmm I think the 45 the zinc is behind the prop. I have a 50kg so it's under the unit. While your in there I would consider getting a six blade vetus prop of it didn't come with one, I changed mine and I have to say it's a world of difference, much quieter and moves the boat better!

[Neil]

Holy crap! Really? This site is incredible. Ours came with a six prop, I'm glad it's quiet! I don't want to wake the fishes.