• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

31 TE head conversion

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
Jforesta
Gold Member
Gold Member
Posts: 95
Joined: Wed Jun 11, 2014 7:29 am
Home Port: Northport

31 TE head conversion

Post by Jforesta »

Want to convert the head on my 31TE from saltwater flush to fresh water. Any Sugestions. It has a Jabsco manual pump flush.
SeaQuel
1997 31TE
3126 Cat
Formally
Abbastanza
2000 Albin 28 TE
Joe F
got2dive
Gold Member
Gold Member
Posts: 26
Joined: Mon Sep 16, 2013 2:53 pm
Home Port: none

Re: 31 TE head conversion

Post by got2dive »

Dont know if want to change water over because of smell.but 31te head smelled from the saltwater so i installed a inline deoderizer its called a head o mattic tankette have it a year now no smell and nice blue saltwater
User avatar
catalina_mike
Gold Member
Gold Member
Posts: 721
Joined: Mon Mar 09, 2015 11:20 am
Home Port: Dana Point

Re: 31 TE head conversion

Post by catalina_mike »

We use our shower spray head to flush the head.... Ha Ha works great and is simple.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
whwells
Gold Member
Gold Member
Posts: 1230
Joined: Mon Dec 27, 2010 10:20 pm
Home Port: Anacortes Marina, Anacortes, Wa
Location: Trinidad, Ca.. & Tahoe Vista, Ca.

Re: 31 TE head conversion

Post by whwells »

You can do this. My former 35te had the salt water flush manual toilet. We changed to electric and fresh water. Pulled the fresh water with a "T" off the head sink. Remember you have to avoid any back water feeding so get the right valve for that issue. We enjoyed the change over and it did stop the smell issue.
whwells "Howard"
Sprig1
Gold Member
Gold Member
Posts: 390
Joined: Thu Dec 11, 2014 5:05 am
Home Port: Long Cove Marina, Chester River Maryland

Re: 31 TE head conversion

Post by Sprig1 »

Hi all what type of valve would you use in that application? I'm thinking about using two separate tanks and just t the fill lines and vent lines any thoughts or suggestions.
Post Reply

Return to “General Discussion”