Hello, I´m repowering my 1994 Albin 28. I´m removing a Pennisular 6.5 and installing a 5.9B Cummins. I´m looking for a measurement from the center line of the transmission mount stud back to the bulkhead just forward of the fuel tank.
I believe I will have to move the transmission forward to accommodate the Cummins engine. If someone has an Albin 28 with a Cummins or has done this repower some dimensions would be very helpful. Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin28te dimensions
-
rjkb21
- Gold Member
- Posts: 3
- Joined: Mon Nov 23, 2015 4:59 pm
- Home Port: Glastonbury CT