spray head for 02 28 te

[saltshaker28]

my sprat head on my galley faucet broke does anyone know who makes them and or where i can buy one? I have an 02 28 te

[Tree]

Mine was the same, i just unscrewed the part and left it at that - is yours the plastic head of the chrome plated one?

[Pitou]

Most likely one version or another of Scandvik. My 2002 28 came with the ones pictured in the link. My 2006 31 came with the same, but a different spray head that I could not stand and contacted them for swap outs. Hope that this helps.

http://www.scandvik.com/index.cfm/metho ... ID/694.htm

If it's Scandvik .. download the catalog and replacement heads are on page 52.

[saltshaker28]

thanks for the info scandvik it is

[sweetwater]

My suggestion is to replace the faucet with a regular faucet from Home depot....so much more useable without the sprayer. I did the one in the head also because we don't shower in there. Its an easy, cheap job.

[Pedro]

Sweetwater, Is yours a 28te?If so how do you get to the underside of the faucet?

[Russell]

To get to the underside of the galley sink you remove the screws in the teak trim around the cabinet and the whole thing pulls out. I also replaced my galley faucet. Here are pictures of the faucet and the space behind the cabinet.

[Tree]

Russ, did you ever do the faucets in the heads? I'd quite like to swap mine out for the whale brand ones, purely because they do a shower faucet that fits in the gap perfectly.

I've had a quick look, and for someone that's 6'4", it looks a horrible job!

[Russell]

No the Scandvik faucet in the head was in good shape so I left it alone. I don't remember what it looked like under there but nothing is easy on these small boats.

[catalina_mike]

I changed my galley one and looked at doing the head one. Looks like from the battery access then up the wall about 3" of clearance for 2 feet to the locking nuts. No way for me, I'm tapping out on that one and informed the Commodore not very possible. Not impossible... Hope someone has a trick, I'd love to hear it.

[Nancy]

I replaced the galley faucet at the same time that we installed a new fridge. I was glad to not have to take the sink cabinet apart.

I've had new faucets for the head sink and shower for three years, but my arms are too short to do the swap. I've been waiting for my husband to do it or for it to move up on the priority list for our mechanic. I think the right size person with long enough arms can do it.

[Nancy]

Re: the head faucets - see this thread: viewtopic.php?f=5&t=5758&p=35475&hilit=sink#p35475

[Pedro]

Thanks Russell, Galley storage cabinet popped right out, found the clog, done,Now I can plan on replacing the faucet over the winter,

[Ben423]

Replaced the galley faucet and, since I had to remove the sink to change the faucet, I had it polished and replaced the drain.

[Nancy]

Ben, that looks fantastic, especially the sink! Where did you have it polished?