so we purchased a West Marine ridged hull 10'. I'm trying not to mount anything big on the swim step because of the diving. Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Dinghy with 28TE
-
catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Dinghy with 28TE
OK guys and Gals how are you transporting your dingy? We went to Catalina and borrowed a friends and the Commodore will not be seen in it again so we purchased a West Marine ridged hull 10'. I'm trying not to mount anything big on the swim step because of the diving.
Thanks
so we purchased a West Marine ridged hull 10'. I'm trying not to mount anything big on the swim step because of the diving. Thanks
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Dingy with 28TE
If you have a swim platform the Weaver "removable" Snap Davis with or without standoffs are the way to go. Insert when in use and remove when not. They are small, stow easily in one of your deck boxes and the remaining bases will not interfere with diving or fishing. I installed them on my 28 and my 31.
Search "Weaver Snap Davits" and you should find a few different threads.
Search "Weaver Snap Davits" and you should find a few different threads.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
Mntry_Goodson
- Gold Member
- Posts: 61
- Joined: Thu Nov 21, 2013 12:33 pm
- Home Port: Monterey, CA
Re: Dingy with 28TE
Mike, take a look at my April 30, 2015 post for long range modifications. My 8'4" rib is on top.
Darryl
"Terry Lee II"
1999 28TE 6LP
Engine box / Trailer
Monterey, CA
"Terry Lee II"
1999 28TE 6LP
Engine box / Trailer
Monterey, CA
-
larson254
- Swabby
- Posts: 3
- Joined: Thu Aug 01, 2013 8:44 pm
- Home Port: PORT CHARLOTTE, FL 33948
Re: Dingy with 28TE
I pull my 8ft up unto the swim platform and tie off from dinghy eyeballs to transom cleats, and 1 clean the I placed low just inside transom door. Works Great! No weavers needed, my weavers are for sale.
SLAINTE
SLAINTE