Zincs questions

[Jeremyvmd]

Im not near the boat and would like to order new engine zincs prior to going down...does anyone know what size zincs I need for a peninsular 300hp and a entec genny? I would like to get them with plugs so if you have that info too that would be awesome.

Also does anyone know if the cruis air ac u its have zincs?

Thabks a million guys!

[Deb]

I don't think is zincs on the Ac unit

[Pitou]

Im not near the boat and would like to order new engine zincs prior to going down...does anyone know what size zincs I need for a peninsular 300hp and a entec genny? I would like to get them with plugs so if you have that info too that would be awesome.

Also does anyone know if the cruis air ac u its have zincs?

Thabks a million guys!

As answered by PM:

Entec has one E-1 in the heat exchanger. You can just buy the anode and reuse the plug. The anode will need to be cut down with a hacksaw as the standard length is too long. Just insert and determine what needs to be cut off to fit. Buying the anode from Entec / now Mastry out of Florida is foolishly, crazy expensive. You can pickup the E-1's anywhere.

[Jeremyvmd]

Thanks again. I also ended up ordering new engine zincs from peninsulr direct. Will measure and post that info when it arrives...will also post amount that needs to be cut off the genny zinc!