I have a 1983 36 ft albin.... the forward bildge under the forward salon has water in the blidge. there always seems to be water in there. I'm thinking because of the forward tilt of the boat it will not drain ... can a bildge pump be installed in that area and where would one pump it over board ,, thank you
kevin g
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Forward bilge pump
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
- Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: Forward bilge pump
Kevin. It's the same issue with the 28. I've fitted a bilge pump that pumps into the shower sump.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 246
- Joined: Wed Oct 13, 2010 7:15 pm
- Home Port: Warwick, RI
- Location: Warwick, RI
Re: Forward bilge pump
Our 40 does the same, although less as the beer supply stored there diminishes on long trip. It would be easy enough to put a through hull above the water line up through the storage locker or anchor locker, and run some wires back to the engine room. Make sure there is a high loop in the hose and use good quality hose as you're up near the bow and the through hull may be underwater at times.
Mike and Sue Phillips
Warwick, RI
SUSAN HELENA 1985 40' Trawler
Warwick, RI
SUSAN HELENA 1985 40' Trawler
Re: Forward bilge pump
Our 36 has exactly the same problem and the solution was a pump that goes into the sump pump tank. You just have to remember to switch on both or make sure the auto switches are functioning properly.