• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Shaft Dia. 2001 Albin 28 with 300 yanmar

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Malcolm
Deckhand
Deckhand
Posts: 8
Joined: Fri Jul 04, 2014 10:55 pm
Home Port: Mill Bay, B.C. Canada

Shaft Dia. 2001 Albin 28 with 300 yanmar

Post by Malcolm »

Just looking to confirm from a previous post I looked up, the shaft zinc on the 2001 Albin 28 with a Yanmar 300 is a C7? 1.5" dia? Thanks,
Top
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:
Contact RobS

Re: Shaft Dia. 2001 Albin 28 with 300 yanmar

Post by RobS »

Yes. 1-1/2" shaft. C-7 collar zinc. Be sure to seat it with smacks of a hammer as you tighten it down and do not put it up against the cutlass bearing.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Top
Malcolm
Deckhand
Deckhand
Posts: 8
Joined: Fri Jul 04, 2014 10:55 pm
Home Port: Mill Bay, B.C. Canada

Re: Shaft Dia. 2001 Albin 28 with 300 yanmar

Post by Malcolm »

Thanks very much!
Top
Post Reply

Return to “Albin Maintenance”