Mike,
I have a 1987 Albin 36 and have never really needed a bow thruster. I will admit there have been a couple of times one would have come in handy and given me a little 'finesse' but never seemed worth the $8-10K to have a bow thruster installed. When I first got my boat (about 5 years ago), I discovered this web site created by Bryant Vann, who shall be ever referred to as "Saint Bryant". Here's the URL: http://www.his.com/~vann/KrgStuff/Krognidx.htm scroll down about 3/4 of the site to 'section 9'. Article 9.5 really helped me (along with the other docking articles). You will learn about 'goosing' and a 'magic stick' amongst other really helpful techniques.
Once you get these techniques down, you will really 'wow' the other captains that not only have two engines but a bow and possibly stern thruster.
Good luck,
Rob
Ka'Why Knot
Rob & Sharon Crow
1987 36' Double Cabin
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
How to dock your Albin
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
Re: How to dock your Albin
Rob Crow posted this one. Very good read and very helpful. Thanks Rob!
John
Former - 28 TE Convertible"Afterglow"
Former - 28 TE Convertible"Afterglow"
-
- Gold Member
- Posts: 199
- Joined: Sun Aug 24, 2014 6:55 am
- Home Port: Saugatuck, Mi
Re: How to dock your Albin
I am a new Albin owner and my dock has current from starboard and usually wind from starboard.....here most boats are docked "bow in". I have had a very hard time as the wind/current carries the stern away from the dock.....I have a starboard tie on ......so the stern is carried away from the dock. I think that most boats are docked bow in due to water depth, but I think I have enough to dock stern in and will try it the next time......I have just read Ric's primer on docking and it may be that "stern in' would be much easier....any thoughts or comments on this would be greatly appreciated.
-
- Swabby
- Posts: 1
- Joined: Wed Jun 24, 2015 2:37 pm
- Home Port: cape cod
Re: How to dock your Albin
Reading all I can pending the purchase of a 28 TE. Decades of experience with outboards, reading these posts has me downright terrified. where the hell am I going to find a place to practice this??
lots of good info here, and it looks like a great boat!
lots of good info here, and it looks like a great boat!
- Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: How to dock your Albin
schorert wrote:Reading all I can pending the purchase of a 28 TE. Decades of experience with outboards, reading these posts has me downright terrified. where the hell am I going to find a place to practice this??
lots of good info here, and it looks like a great boat!
I wouldn't worry - I went from a boat with a volvo duoprop outdrive you could turn on its length to the Albin that i now dock astern in any weather without issue.
Its just a new learning curve and something different - maybe for practice, a couple of danbuoys on a shot line a bit more than the beam of the boat in open water?
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: How to dock your Albin
See if you can find a 28TE owner to spend some time with you. I'm thinking that shouldn't be too tough on the Cape. Next choice would be someone with lots of boat handling experience. Our marina manager did dock practice with me a few times. He is absolutely unflappable and a great coach.schorert wrote:Reading all I can pending the purchase of a 28 TE. Decades of experience with outboards, reading these posts has me downright terrified. where the hell am I going to find a place to practice this??
lots of good info here, and it looks like a great boat!
Good luck and have fun. I know you'll figure it out.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Re: How to dock your Albin
[quote="schorert"]Reading all I can pending the purchase of a 28 TE. Decades of experience with outboards, reading these posts has me downright terrified. where the hell am I going to find a place to practice this??lots of good info here, and it looks like a great boat![/quote
My 28 docks stern in, bow facing north on a dead end canal. I usually don't bother going out on a strong east wind because my bow will swing west and I am unable to bring her back unless I want to go broadside to the boats that are pointing east at the end of the canal. On Sunday there was a 15-20 knot NW wind and this time my bow was pushed over to the east and I had issues getting her back into her crib. All in all it comes down to experience, practice, don't panic, go slow and if you have to pull, out and do it again. I actually did a you tube video on backing in, Go you tube, under search put in "28 Albin backing stern in." It will give you and idea of how small an area I have to work with. Patience, Good Luck.
My 28 docks stern in, bow facing north on a dead end canal. I usually don't bother going out on a strong east wind because my bow will swing west and I am unable to bring her back unless I want to go broadside to the boats that are pointing east at the end of the canal. On Sunday there was a 15-20 knot NW wind and this time my bow was pushed over to the east and I had issues getting her back into her crib. All in all it comes down to experience, practice, don't panic, go slow and if you have to pull, out and do it again. I actually did a you tube video on backing in, Go you tube, under search put in "28 Albin backing stern in." It will give you and idea of how small an area I have to work with. Patience, Good Luck.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: How to dock your Albin
That search didn't produce any relevant results. How about a link?Serenity wrote:I actually did a you tube video on backing in, Go you tube, under search put in "28 Albin backing stern in." It will give you and idea of how small an area I have to work with. Patience, Good Luck.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: How to dock your Albin
https://youtu.be/ZYT0Ei1M020Nancy wrote:That search didn't produce any relevant results. How about a link?Serenity wrote:I actually did a you tube video on backing in, Go you tube, under search put in "28 Albin backing stern in." It will give you and idea of how small an area I have to work with. Patience, Good Luck.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 48
- Joined: Sun Aug 13, 2017 7:38 am
- Home Port: Keyport NJ
Re: How to dock your Albin
I just bought an Albin 28. The guys in my marina asked me how am I going back into the slip. I told them I watched a YouTube video. They all laughed. I put the boat in the slip on my first shot on my maiden voyage. I takes practice but it's not bad. In reverse turn the wheel left and forget it.
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: How to dock your Albin
Especially with a starboard side tie up.Jim's Boat wrote: ↑Mon Sep 11, 2017 9:11 pm I just bought an Albin 28. The guys in my marina asked me how am I going back into the slip. I told them I watched a YouTube video. They all laughed. I put the boat in the slip on my first shot on my maiden voyage. I takes practice but it's not bad. In reverse turn the wheel left and forget it.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: How to dock your Albin
Whenever getting fueled up or pumped out I always thanked Albin for the starboard side fuel fill and and waste cap
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 3
- Joined: Thu Oct 01, 2015 3:43 pm
- Home Port: EDGEWATER, MD
- Location: Edgewater, MD. South River
Re: How to dock your Albin
You need to know left from right hand prop. For LH prop, boat only rotates CCW, therefore its nice to have a starboard side slip. Don't rely on your bow thruster to save the day.
Allowing for wind and current, stop forward movement- turn wheel full left and pop throttle forward/back- as you get your turn to about 80 degrees back boat close to port side pilings and put it in. Your transom door needs to be open to see piling and swim platform.
If you have strong winds/current start rotation early to allow for time to rotate
Allowing for wind and current, stop forward movement- turn wheel full left and pop throttle forward/back- as you get your turn to about 80 degrees back boat close to port side pilings and put it in. Your transom door needs to be open to see piling and swim platform.
If you have strong winds/current start rotation early to allow for time to rotate
-
- Gold Member
- Posts: 27
- Joined: Sun Mar 24, 2019 2:40 pm
- Home Port: Cape Cod
Re: How to dock your Albin
After a 40 mile trip to the new home of our 97 Albin 28 on Cape Cod we did a pretty good job of backing her into our slip. 45 minutes of pathetic practice in our outer harbor around vacant mooring balls was extremely helpful. The posts on this thread gave us a roadmap to follow that made a huge difference for us. Thanks to all for your experience and wisdom.
-
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: How to dock your Albin
Yeah, we use a lot of JCollins' technique with our A25. Except the Yanmar engine we have is right hand turning prop, unlike left hand propped Volvos, so prop walk astern is to port. But I digress from my reason for dropping in on the TE forum. We're visiting Fisherman's Bay on Lopez Island, WA & spotted a 28 TE docked in the Islander Resort Marina. Anyone know who that is?
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
- Gold Member
- Posts: 4
- Joined: Wed Oct 09, 2019 9:02 pm
- Home Port: Mill creek-Annapolis,Md
Re: How to dock your Albin
The 28TE can definitely act as a sail on a windy day docking. I always turn clockwise into the wind when docking which acts as a brake when lining up the slip. Going down wind just pushes you out of position at an accelerated pace.
Chris H
“Sea Kelpie”
2000 28 TE engine box
Annapolis,MD
“Sea Kelpie”
2000 28 TE engine box
Annapolis,MD