• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Sheen from exhaust
-
- Gold Member
- Posts: 1209
- Joined: Sat Dec 02, 2006 10:06 am
- Location: Wickford RI
- Contact:
Sheen from exhaust
This is my first diesel, so I'm still figuring it out. How much "sheen" do others see in the water from their exhuast when the engine is shut down? I came in this afternoon from my first day of fishing (one slightly undersized bass) and when I killed the engine at the dock there was about a 4 sq foot sheen of petroleum of some type coming out of the side exhaust. I have the 315 Yanmar engine with 340 hours on it. I ran hard coming in (3200 RPM for 20 minutes) and idled in for 12 minutes from the breakwater to the slip (no wake zone). Should this be a concern or is normal for a diesel? I realize there must be some petrochemicals in the exhaust.
Ric Murray
Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
-
- Gold Member
- Posts: 243
- Joined: Fri Jul 28, 2006 5:49 pm
- Location: San Francisco,CA
Ric,
I get this from time to time, I especially see it in the cooler weather out here in the left coast at engine startup . I also see it sometimes after I have to use a hard reverse burst to turn the boat into the slip. Not sure what that means but I think you are seeing something that is considered normal.
Paul
I get this from time to time, I especially see it in the cooler weather out here in the left coast at engine startup . I also see it sometimes after I have to use a hard reverse burst to turn the boat into the slip. Not sure what that means but I think you are seeing something that is considered normal.
Paul
1999 Albin 28 TE "Antoinette"
- Cape Codder
- Gold Member
- Posts: 363
- Joined: Thu Apr 19, 2007 8:59 pm
- Location: Falmouth, MA - Cape Cod
-
- Gold Member
- Posts: 544
- Joined: Tue Apr 18, 2006 1:28 pm
- Location: Mystic, CT
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
- Mariner
- Gold Member
- Posts: 1450
- Joined: Mon Apr 17, 2006 11:18 am
- Location: Gig Harbor, WA
It's common to see just a little bit of a thin sheen. What you're seeing is fuel residue from the exhaust. A very small amount of unburned fuel that has accumulated in the exhaust, trapped in the soot, can create a surprisingly large sheen when you slow down and the exhaust is resubmerged and water sets it free. The mention of it being more noticable after hard backing down only supports this, as water being forced into the exhaust would just dislodge more soot.
Again, it's an extremely small amount of fuel, not even actually measurable, absorbed into the soot that naturally lines the exhaust. Now, if you see a thicker sheen similar to what you would see if you were to actually pour a cup or two of diesel into the water, then you have cause for concern. But a four foot wide sheen is equivalent to about one drop of fuel.
Again, it's an extremely small amount of fuel, not even actually measurable, absorbed into the soot that naturally lines the exhaust. Now, if you see a thicker sheen similar to what you would see if you were to actually pour a cup or two of diesel into the water, then you have cause for concern. But a four foot wide sheen is equivalent to about one drop of fuel.