• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Good source for wet exhaust hose & T-bolt hose clamps

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Nancy
Gold Member
Gold Member
Posts: 1908
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Good source for wet exhaust hose & T-bolt hose clamps

Post by Nancy »

I'm looking to buy 6' of 5" wet exhaust hose and a dozen T-bolt exhaust hose clamps - at the most reasonable price of course. I'm googling....if anyone has suggestions, I'd welcome them.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
User avatar
rcwhite
Gold Member
Gold Member
Posts: 163
Joined: Mon Jul 28, 2008 7:05 am
Home Port: Southport Maine

Re: Good source for wet exhaust hose & T-bolt hose clamps

Post by rcwhite »

Defender is usually pretty good.
special k
Gold Member
Gold Member
Posts: 315
Joined: Fri Mar 06, 2009 3:37 pm
Home Port: mystic
Location: tolland, ct

Re: Good source for wet exhaust hose & T-bolt hose clamps

Post by special k »

while replacing my exhaust elbows yesterday i needed to replace my exhaust hose and then i needed to replace my clamps as the bolts were previously "shortened".

quick trip to west marine which is nearby for the two clamps set me back over 50 bucks! (ouch) i'm sure they could be sourced better but it was 4 o'clock and i was eager to be done and up & running.
Nancy
Gold Member
Gold Member
Posts: 1908
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: Good source for wet exhaust hose & T-bolt hose clamps

Post by Nancy »

Ouch is right on those clamps, but that's the price we pay to be running for the weekend. !! Luckily, our exhaust isn't broken, just needs improvement.

I ordered the hose from Defender. Price was relatively reasonable, and I was able to order the length we need and not a full 12' piece. We have to wait for Defender to order it, though. Shouldn't be too long.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
Post Reply

Return to “Albin Maintenance”