The fiberglass sides that run along the inside groove of my bow pulpit, where the anchor and chain slide in and out, is banged and chipped. Has anyone tried lining the slot with stainless? If so, how would I do that? Other solutions welcome too.
Thanks.
Rick
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Bow pulpit repair question
Moderator: Jeremyvmd
-
Legacy
- Gold Member
- Posts: 411
- Joined: Mon Apr 17, 2006 1:40 pm
- Home Port: Boston, MA
- Location: Boston
- Contact:
Bow pulpit repair question
Rick
1998 Albin 35TE
"Legacy"
1998 Albin 35TE
"Legacy"