28TE wheel center cap

Post by **jms02050** » Fri Apr 17, 2015 1:17 pm

Has anyone successfully replaced the plastic center cap on their wheel? I ordered a 2.5 inch replacement from Seadog but it was too big (but not by much). I can't find any identification on the wheel itself to reach out to the manufacturer. Guessing it's Vetus or Edson.

Post by **Pitou** » Fri Apr 17, 2015 1:39 pm

From that vintage Albin, most likely Vetus.

Post by **jms02050** » Fri Apr 17, 2015 3:07 pm

I've got a message out to Vetus. I'll be sure to post a follow up as I know others have asked about the cap as well.

Post by **Tree** » Fri Apr 17, 2015 3:49 pm

Pretty sure mine is Vetus also. I'm missing the Albin logo though

Post by **jms02050** » Fri Apr 17, 2015 4:07 pm

Same here. That's why I'm looking to repace it. Vetus replied asking for pics and measurements. We'll see...

Post by **Tree** » Fri Apr 17, 2015 4:58 pm

When I get round to it, there is a company here in the UK that do gel overlay logos called DMB graphics. We've used them a lot in the modified car scene. I reckon they could do stick on gel badges easy enough.

Post by **Yearwood** » Sun May 03, 2015 2:14 pm

The first time we replaced it with a piece of machined and coated mahogany. Now we are fancier and it has been replaced with a piece of machined and coated mahogany embossed with a lighter wood and with the name of the boat engraved. My co-owner is a wood worker hobbyist with a lot of time on his hands.

Albin Owners Group

Albin Owners Group

28TE wheel center cap

28TE wheel center cap

Re: 28TE wheel center cap

Re: 28TE wheel center cap

Re: 28TE wheel center cap

Re: 28TE wheel center cap

Re: 28TE wheel center cap

Re: 28TE wheel center cap