• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Head Plumbing
-
PonusNick
- First Mate
- Posts: 38
- Joined: Tue Sep 30, 2014 5:16 pm
- Home Port: Stamford, CT
Head Plumbing
Can someone provide or direct me to a schematic of the head plumbing on a 1985 A 27? The head is saltwater and there is a valve to pump either overboard or into the holding tank...but there is another valve and piping leading to a diaphragm pump in a small compartment below the helm. Ultimately, I'd like to set it up to flush with salt but only into the holding tank.
-
Jay Knoll
- Gold Member
- Posts: 475
- Joined: Wed Aug 04, 2010 11:21 am
- Home Port: Vero Beach FL
Re: Head Plumbing
Ponus
This sounds like a modification some PO made, I don't have anything like that on my 27FC. Where do the lines to/from the diaphragm pump run? Perhaps the diaphragm pump is used to empty the holding tank when in legal discharge areas?
Jay
This sounds like a modification some PO made, I don't have anything like that on my 27FC. Where do the lines to/from the diaphragm pump run? Perhaps the diaphragm pump is used to empty the holding tank when in legal discharge areas?
Jay