Ahoy, looking for info,
Just bought a 1971 Albin 25. Last week I went in the dog house, pulled up the deck plate to access and inspect the rudder. I found a wire had fallen off the connection to the rudder. I went to re-attach the wire and found, about 18" up the rudder cable, a long coil of that wire attached to NOTHING! I looked at the Albin manual online and I cannot find any diagrams of how the boat should be bonded.
Anyone know?
Thank you,
greg
PS I'm in San Francisco Bay
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 25, 1971 bonding & zincs
-
R&R
- Deckhand
- Posts: 5
- Joined: Mon Sep 15, 2014 4:25 pm
- Home Port: san francisco, ca