I don't see this topic in the maintenance section. My Morse control throttle eases off from 3300 rpm to about 2900 from vibration so I keep increasing it a little every few minutes. I forget how to tighten it. There are two screws , one on either side of the base of the throttle on the housing. See the attached photo. I think they either tighten or loosen the throttle but I'm not sure. Does anyone have this type of throttle/gearshift control? I appreciate any help. I've tried searching for Morse control adjustment online without success.
Thanks.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Morse control - throttle slows
Moderator: Jeremyvmd
-
Jack
- Gold Member
- Posts: 192
- Joined: Fri Sep 10, 2010 2:01 pm
- Home Port: Essex CT
Morse control - throttle slows
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Morse control - throttle slows
Took me a bit of looking but I eventually found this: http://www.seastarsolutions.com/wp-cont ... 00-049.pdf
Teleflex Morse is now Sea Star Solutions.
Teleflex Morse is now Sea Star Solutions.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
JerseyNSC40
- Gold Member
- Posts: 68
- Joined: Thu Aug 04, 2011 9:25 am
- Home Port: Mantoloking, NJ
Re: Morse control - throttle slows
Jack when you are in there tightening things up also take a good look at the cotter pin holding the cable. Maake sure it is nicely spread, etc. One of mine let go this year leaving the clutch flapping around like a fish on the deck. I changed it to the ring tyoew that should not come off. Good luck, and nice seeing you in Townsends!
Craig
Craig
AlbinNSC40
Craig
Craig
-
Jack
- Gold Member
- Posts: 192
- Joined: Fri Sep 10, 2010 2:01 pm
- Home Port: Essex CT
Re: Morse control - throttle slows
Thanks very much for the manual and for the suggestion about the pin. Big help!
-
Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Re: Morse control - throttle slows
Jack, you might want to take a look at the throttle cable linkage on the engine. It just might need a tightening.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York
-
ladyT
- Gold Member
- Posts: 3
- Joined: Mon May 16, 2016 7:47 am
- Home Port: Oak Beach