• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

94 Albin 28TE Windlass

Post Reply
Foolishfrog7
Swabby
Swabby
Posts: 1
Joined: Fri Feb 07, 2014 8:44 pm
Home Port: New Rochelle

94 Albin 28TE Windlass

Post by Foolishfrog7 »

Fellow members on this site have stated that the Albin 28TE is pre-wired for windlass. I have a 94 and can not seem to find the wires in the anchor locker. Was this standard on a 94 and if so where are the wires located? Any help or information is greatly appreciated!!!
Top
User avatar
Serenity
In Memorium
Posts: 598
Joined: Mon Dec 13, 2010 12:15 pm
Home Port: East Islip Anglers, New York
Location: Long Island

Re: 94 Albin 28TE Windlass

Post by Serenity »

I would look under the port side V-berth or take a peak under the aft berth on the forward bulkhead. Don't get confused with the bow thruster harness.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Top
thomaslong
Gold Member
Gold Member
Posts: 93
Joined: Wed Sep 19, 2012 3:08 pm
Home Port: New Orleans

Re: 94 Albin 28TE Windlass

Post by thomaslong »

I just installed a windlass in my 1996 Albin 28 TE, and there was no existing wiring. All new wiring had to be run from the windlass back to the bus, switch and breaker down the starboard side, following the same route as the thruster wiring.
Top
Post Reply

Return to “Tournament Express 26-35”