• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post Reply
902dlw
First Mate
First Mate
Posts: 40
Joined: Fri Aug 02, 2013 1:33 pm
Home Port: Severn River, Annapolis, MD
Location: Annapolis, Maryland

dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post by 902dlw »

Has anybody had experience in replacing the dry section exhaust elbow that bolts onto the turbo charger? Is it a custom part or one that you can order? Who would be a contact, since an Albin contact seems to be difficult?

Barry
alwsail
Deckhand
Deckhand
Posts: 7
Joined: Sun Nov 03, 2013 2:41 pm
Home Port: Groton, Ct

Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post by alwsail »

Hi Barry
Don't have an answer to tha question but I am looking at one with that engine. Do you know what your GPS is is you hold is at 7 knot for awhile?
Does the turbo make the 450 get better mph than the 420 non turbo?
Thank
Al
alwsail
Deckhand
Deckhand
Posts: 7
Joined: Sun Nov 03, 2013 2:41 pm
Home Port: Groton, Ct

Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post by alwsail »

Sorry Barry, I meant gal per hr in both questions. Got to watch that auto correct
Al
902dlw
First Mate
First Mate
Posts: 40
Joined: Fri Aug 02, 2013 1:33 pm
Home Port: Severn River, Annapolis, MD
Location: Annapolis, Maryland

Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post by 902dlw »

At 1350 rpm on a clean bottom I can get 7+ knots and burn just under 2 GPH. I have not ant experience with 420 non vs 450 turbo.
902dlw
First Mate
First Mate
Posts: 40
Joined: Fri Aug 02, 2013 1:33 pm
Home Port: Severn River, Annapolis, MD
Location: Annapolis, Maryland

Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET

Post by 902dlw »

1350 rpm will get 7 knots a with just under 2 GPH. I have no expierence with 420 non vs. 450 turbo.
Post Reply

Return to “36' Express Trawler, 40' North Sea Cutter, 26' Center Console”