Has anybody had experience in replacing the dry section exhaust elbow that bolts onto the turbo charger? Is it a custom part or one that you can order? Who would be a contact, since an Albin contact seems to be difficult?
Barry
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
dry exhaust elbow on 450 Cummins engine--2002 36' ET
-
- First Mate
- Posts: 40
- Joined: Fri Aug 02, 2013 1:33 pm
- Home Port: Severn River, Annapolis, MD
- Location: Annapolis, Maryland
-
- Deckhand
- Posts: 7
- Joined: Sun Nov 03, 2013 2:41 pm
- Home Port: Groton, Ct
Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET
Hi Barry
Don't have an answer to tha question but I am looking at one with that engine. Do you know what your GPS is is you hold is at 7 knot for awhile?
Does the turbo make the 450 get better mph than the 420 non turbo?
Thank
Al
Don't have an answer to tha question but I am looking at one with that engine. Do you know what your GPS is is you hold is at 7 knot for awhile?
Does the turbo make the 450 get better mph than the 420 non turbo?
Thank
Al
-
- Deckhand
- Posts: 7
- Joined: Sun Nov 03, 2013 2:41 pm
- Home Port: Groton, Ct
Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET
Sorry Barry, I meant gal per hr in both questions. Got to watch that auto correct
Al
Al
-
- First Mate
- Posts: 40
- Joined: Fri Aug 02, 2013 1:33 pm
- Home Port: Severn River, Annapolis, MD
- Location: Annapolis, Maryland
Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET
At 1350 rpm on a clean bottom I can get 7+ knots and burn just under 2 GPH. I have not ant experience with 420 non vs 450 turbo.
-
- First Mate
- Posts: 40
- Joined: Fri Aug 02, 2013 1:33 pm
- Home Port: Severn River, Annapolis, MD
- Location: Annapolis, Maryland
Re: dry exhaust elbow on 450 Cummins engine--2002 36' ET
1350 rpm will get 7 knots a with just under 2 GPH. I have no expierence with 420 non vs. 450 turbo.