• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Water heater replacement
Moderator: Jeremyvmd
Water heater replacement
looks like my hot water heater replacement installation is gonna take the shop 25 hours according to their estimate.
groan...
groan...
- Richard
- Gold Member
- Posts: 115
- Joined: Tue Jun 27, 2006 8:17 am
- Location: Queenstown, MD
- Contact:
-
- Gold Member
- Posts: 713
- Joined: Thu Jul 06, 2006 4:22 pm
- Home Port: Bermuda
- Location: Bermuda
I didn't add up the hours but I did the job myself & I'm guessing I must have spent the better part of 20 hours replacing my waterheater.
It seems like almost half of that time was spent going backwards & forwards to the plumbing store getting fittings & finding out that I didn't get what I needed or could could not find what was needed so another way had to be found
Engine hoses to & from the water heater had to be replaced which meant that the coolant had to be changed. Thats OK. It was overdue for a flushing & change anyway but that added a few hours to the overall job.
Just gotta love boats
It seems like almost half of that time was spent going backwards & forwards to the plumbing store getting fittings & finding out that I didn't get what I needed or could could not find what was needed so another way had to be found
Engine hoses to & from the water heater had to be replaced which meant that the coolant had to be changed. Thats OK. It was overdue for a flushing & change anyway but that added a few hours to the overall job.
Just gotta love boats
1996 A32 'S' Type
Bermuda
1986 A27AC 1986-2000
34' 5th wheel trailer
VP9KL (IRLP node #7995)
Bermuda
1986 A27AC 1986-2000
34' 5th wheel trailer
VP9KL (IRLP node #7995)
well, i guess the main reason to replace it was to maintain resale value. i think you can only let so many things go before a boat looses buyer appeal. i don't think hot water is all that big a deal and i suppose i could have just removed the old unit which was corroded badly, but with my recent engine change and accompanying new hoses, etc., i would think even though its a '93, it might still be reasonably marketable, not that i want to sell it anytime soon.
what's that about a hole in the water into which money is poured?
what's that about a hole in the water into which money is poured?
-
- Gold Member
- Posts: 713
- Joined: Thu Jul 06, 2006 4:22 pm
- Home Port: Bermuda
- Location: Bermuda
It seems like you can expect 10 years of low maintenance the things like water heaters start to go which leads to something else & leads to something else.
My mechanic was on the boat this morning. I have a rare one. He works sundays sometimes. Actually his boat is stored right next to mine, on MY property & at a very reasonable storage fee.
Anyway we were going over my 32. Nothing too very serious this year but I am looking at an engine removal in a couple years for a good going over for hose & gasket replacement plus anything else that may be found & a repainting before reinstallation.
While the engine is out the engine comartment will be repainted & possibly reduce the size of the fuel tanks to give much more working space around the engine. I don't need anything near the 300 mile range that the boat has now carrying 260 gal of diesel. I'd be happy with half of that.
Big bill to do for sure but we have no plans to sell in the next 10 years.
My mechanic was on the boat this morning. I have a rare one. He works sundays sometimes. Actually his boat is stored right next to mine, on MY property & at a very reasonable storage fee.
Anyway we were going over my 32. Nothing too very serious this year but I am looking at an engine removal in a couple years for a good going over for hose & gasket replacement plus anything else that may be found & a repainting before reinstallation.
While the engine is out the engine comartment will be repainted & possibly reduce the size of the fuel tanks to give much more working space around the engine. I don't need anything near the 300 mile range that the boat has now carrying 260 gal of diesel. I'd be happy with half of that.
Big bill to do for sure but we have no plans to sell in the next 10 years.
1996 A32 'S' Type
Bermuda
1986 A27AC 1986-2000
34' 5th wheel trailer
VP9KL (IRLP node #7995)
Bermuda
1986 A27AC 1986-2000
34' 5th wheel trailer
VP9KL (IRLP node #7995)
How about.....
Hey Tomcat,
Did you look into the "HOT WATER ON DEMEND" units? Mounts on a bulkhead, no tank. WM has 'em.
Did you look into the "HOT WATER ON DEMEND" units? Mounts on a bulkhead, no tank. WM has 'em.
thanks, tony.
looks like it might have been an option. sadly, i'm already commited to the standard replacement. the link should provide a little info for others here.
...
http://www.plumbingsupply.com/eemaxso.html
...
http://www.plumbingsupply.com/eemaxso.html
- William
- Deckhand
- Posts: 7
- Joined: Tue Oct 03, 2006 2:35 pm
- Location: Deltaville, VA