Having rebuilt my Jabsco Electric twice in the last two years, I am wondering if others have found these to be unreliable? It works fine for a few weeks, but then just stops. Now I only hear a click when I push the button.
Is there a secret cure? If not, I am ready to replace it. Should I go with a Jabsco manual or another brand? I do like the idea of an electric and the wiring is in..
Thanks.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Jabsco Electric Head troubles
Moderator: Jeremyvmd
- dkircher
- Gold Member
- Posts: 210
- Joined: Tue Jun 29, 2010 12:48 am
- Home Port: Bremerton Yacht Club, Bremerton, WA USA
- Location: Bainbridge Island, WA USA
Jabsco Electric Head troubles
Dave
Former 28 TE Owner
Former 28 TE Owner
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Jabsco Electric Head troubles
Had an electric Jabsco head in my 2002 28TE and never had issue from new until she sold this past May. 12 years of flawless operation. Sounds like you got a bum unit.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
- dkircher
- Gold Member
- Posts: 210
- Joined: Tue Jun 29, 2010 12:48 am
- Home Port: Bremerton Yacht Club, Bremerton, WA USA
- Location: Bainbridge Island, WA USA
Re: Jabsco Electric Head troubles
Kevin,
Thanks. It turned out to be jammed because it was used without the incoming seawater valve open. I turned the motor shaft with a screw driver and voila, it works again. Your reply helped me keep the faith.
Sorry about the delayed reply. Too much happening these days.
Thanks. It turned out to be jammed because it was used without the incoming seawater valve open. I turned the motor shaft with a screw driver and voila, it works again. Your reply helped me keep the faith.
Sorry about the delayed reply. Too much happening these days.
Dave
Former 28 TE Owner
Former 28 TE Owner