I'm in the process of redoing an 84' Albin FC. It's no longer a FC but a salon. My problem is a clogged up high pressure vent on the aft side of the expansion tank. Has anyone else had this problem? I'm using CLR and a small pick to remove the clog. I was wondering if this hole is straight or angled back into the neck of the pressure cap.
Thanks,
Vic
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Fresh water high pressure vent
-
Vic K
- Gold Member
- Posts: 248
- Joined: Sun May 13, 2012 9:17 am
- Home Port: Houston