• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
ENTEC FUEL FILTER
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 97
- Joined: Mon Sep 15, 2008 9:53 am
- Home Port: EDENTON, NC
- Location: YEOPIM RIVER, NW ALBEMARLE SOUND
ENTEC FUEL FILTER
Recently dealt with crud in fuel tank. We think the problem is solved, but, in looking at the fuel line to the Entec we could not find a filter. Entec owners please reply as to fuel filtration for the genset.
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: ENTEC FUEL FILTER
I had an Entec on my Albin which is on route to CA. Two filters in between the tank and fuel solenoid on my Entec. It was set-up with a Racor 120 mounted up high in the engine compartment to the rear of the engine on the starboard side of the bulkhead in between the engine and fuel tank. It's one of those upside down views. You may or may not have this component.
There is also a plastic in-line fuel filter on the Farymann just before the fuel solenoid. At a minimum you at least have this filter which should be changed out annually just like any fuel filter.
Here's a link to the Entec parts manuel for the fuel system: http://entecwest.com/parts11.htm
There is also a plastic in-line fuel filter on the Farymann just before the fuel solenoid. At a minimum you at least have this filter which should be changed out annually just like any fuel filter.
Here's a link to the Entec parts manuel for the fuel system: http://entecwest.com/parts11.htm
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13