...
also. found this stuff in the basement. will slop a few coats on the wood backing plates for the windlass.
...
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
clevis pin installation.
Moderator: Jeremyvmd
-
tomcat rio
clevis pin installation.
seems to me i can just drill a hole through the vertical part and stick a pin through in and a link in the anchor chail to relieve any stress on the windlass.
...
also. found this stuff in the basement. will slop a few coats on the wood backing plates for the windlass.
...
...
also. found this stuff in the basement. will slop a few coats on the wood backing plates for the windlass.
...