• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

start stop button rubbers

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
saltshaker28
Gold Member
Gold Member
Posts: 211
Joined: Thu Jul 05, 2007 6:42 pm

start stop button rubbers

Post by saltshaker28 »

Cananyone tell me where to find the protective rubbers that go over the start stop buttons on an 02 28 te
Top
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: start stop button rubbers

Post by jleonard »

I would look in McMaster Carr online. Those are generic itms I believe.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
Top
User avatar
Cape Codder
Gold Member
Gold Member
Posts: 363
Joined: Thu Apr 19, 2007 8:59 pm
Location: Falmouth, MA - Cape Cod

Re: start stop button rubbers

Post by Cape Codder »

Saltshaker28,
If you do locate a supplier, please let us know. I could use a couple. Mine are "sticky", I suspect from suntan lotion, or skin oils that makes them deteriorate.
Bob
2003 Albin 28 TE
Santosha
Top
carolmarie
Gold Member
Gold Member
Posts: 252
Joined: Fri Jul 23, 2010 5:54 pm
Home Port: Essex, New York

Re: start stop button rubbers

Post by carolmarie »

What are stop/ start buttons....?.....?
Top
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: start stop button rubbers

Post by DougSea »

carolmarie wrote:What are stop/ start buttons....?.....?
Some engine types have them. Others don't. So, if you can't see any...

My Penninsular didn't have them. Just a traditional key.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Top
saltshaker28
Gold Member
Gold Member
Posts: 211
Joined: Thu Jul 05, 2007 6:42 pm

Re: start stop button rubbers

Post by saltshaker28 »

They are the rubber protective caps that go over the start and stop buttons I have the 315 Yanmar
Top
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:
Contact RobS

Re: start stop button rubbers

Post by RobS »

carolmarie wrote:What are stop/ start buttons....?.....?
Circa 1998 - 2001 Albin was using the Yanmar factory panel, known as the Yanmar New C-type panel. Those boats are key to start (momentary key switch) with an integrated Stop button. Not the key "on" with independently mounted start and stop buttons.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Top
carolmarie
Gold Member
Gold Member
Posts: 252
Joined: Fri Jul 23, 2010 5:54 pm
Home Port: Essex, New York

Re: start stop button rubbers

Post by carolmarie »

Thanks to all. As Rob commented, I have the Yanmar New C-Type panel. I was unaware that Albin offered different panel configurations with the 300/315 Yanmar.
carolmarie, 2001, 28TE, 6LP-STE.
Top
User avatar
marko
Gold Member
Gold Member
Posts: 152
Joined: Wed Nov 24, 2010 1:23 pm
Home Port: New Bern, NC

Re: start stop button rubbers

Post by marko »

Guys: West Marine has them which worked for my Cummins. Don't know about Yanmar, etc.
Top
Post Reply

Return to “Albin Maintenance”