Just replaced the bottom rudder bearing with a delrin flanged bushing. Had to machine the wear marks off the top of the rudder strut casting, ream the bushing .003 oversize and it assembled with a precise fit. Installed a 316 SS 1" washer as a wear plate. So smooth...
Note new cutlass bearing housing.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
bottom rudder bearing
-
Robb
- Gold Member
- Posts: 83
- Joined: Mon Oct 31, 2011 2:44 pm
- Home Port: Tacoma, WA
bottom rudder bearing
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Robb Stilnovich
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
-
kirley
- First Mate
- Posts: 54
- Joined: Wed Mar 06, 2013 11:16 pm
- Home Port: moss landing ca.
Re: bottom rudder bearing
Nice job!