No worries about the timing.
I actually bought the same closure but it was too large for the gap and was putting pressure on the hinge.
The one you installed must be a smaller size. I'll try again once the boat is in the water.
Thanks.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Velcro type buttons
-
- Gold Member
- Posts: 71
- Joined: Sun Apr 24, 2011 5:29 am
- Home Port: Jamestown, RI
Re: Velcro type buttons
Zero PSI and Zero PSII
2006 28TE FD, Yanmar
2004 31TE, Twin Yanmars
Jamestown, RI
2006 28TE FD, Yanmar
2004 31TE, Twin Yanmars
Jamestown, RI