Rob
thank you i ordered it from Defender will see if they have it .... sorry about the n it is right next to the b ....thanks again
kevin
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
leak...
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
Re: leak...
Nope they dont have it ,,,, life caulk ..... or butyl tape
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: leak...
Here's a copy of my order, click to enlarge. There are a couple phone numbers on it. Maybe you can track down some new old stock. If no luck I would go the tape route first, adhesive sealant as last resort, as it's a bit less work than visa versa
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
Re: leak...
I was searching Ebay and found under hatch sealers Neoprene,,, 1/8 thick ... i am wondering if they mean that it what to use when closing the hatch..ehish is NOT want i want it for,,,, i need it to mount the hatch onto the boat to keep water from coming in and rotting the wood again ... Any thoughts on using neoprene or should i just stick with the Butyl tape,,
-
- Gold Member
- Posts: 32
- Joined: Sun Mar 02, 2014 12:39 pm
- Home Port: Noyo Harbor Fort Bragg, CA
Re: leak...
I have a leak similar to what RobS describes in the area of the port side panel, aft of the sliding pilothouse window. See his photo. Water seeps into the sides of the hole drilled for wiring to pass from the rear quarter berth area, up into the side panel of the pilothouse. The drilled hole goes through the bottom of the side panel, and the top of the side deck structure. So water can potentially seep aft between those two structures. The seeping water slides down the wiring and drips down onto the ceiling upholstered panel of the quarter berth. Has anyone found the actual origin of this type of leak? I have re-sealed, with 4200, the outside joint where the pilot house top sits on the deck structure. Still some leakage. My next suspects are the port side sliding window with its screws on the trim, and canvas snap holes drilled into the trim piece.
Doug A.
96 28TE "Chinook"
Fort Bragg CA
96 28TE "Chinook"
Fort Bragg CA
-
- Gold Member
- Posts: 49
- Joined: Mon Jul 27, 2015 9:44 pm
- Home Port: Saint Marys, Georgia
- Location: Saint Marys, GA
Re: leak...
When I bought my boat there was a leak into the back corner of the quarter berth. After cleaning and replacing all the caulk in the pilothouse to deck joint the leak was gone. But while working on the boat during a rain shower this week I found that water was coming into the very top of the starboard side wall when I had the side panel behind the window off to run wire for an external VHF speaker through the chase above the window. I wasn’t able to find the source of the water unless it is coming in one of the screw holes where the radar arch is attached. I would also like other suggestions of where the water may be entering.
Hatchetjoe
Final Draft
2002 Albin 28 engine box
Yanmar 6lp
Hatchetjoe
Final Draft
2002 Albin 28 engine box
Yanmar 6lp
Hatchetjoe
Final Draft
Albin 28 TE
315 hp Yanmar 6LPA STP 19x17 4 blade prop
Final Draft
Albin 28 TE
315 hp Yanmar 6LPA STP 19x17 4 blade prop