• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Remove cutless bearing case and stuffing box base.

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
User avatar
meridian
First Mate
First Mate
Posts: 112
Joined: Wed Sep 21, 2011 9:00 pm
Home Port: Looper

Remove cutless bearing case and stuffing box base.

Post by meridian »

I was finally able to pull the shaft on my Albin 36'. The cutless bearing case is attached to the hull using (2) ss threaded studs. The stuffing box base is attached to the opposite end using (4) ss screws about ½ x 5”. I was able to get these out but I don’t know what was used to seal the case and base to the hull.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-------------------------------
Terry
Top
Post Reply

Return to “Albin Maintenance”