• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Microwave cabinet
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Microwave cabinet
We've decided that the microwave that came with our boat isn't very useful. It's not tall enough, it's rusty, and we don't have a generator, so it can't be used on the hook.
I've been lusting after the storage space of that compartment. So we've removed the microwave and now the question is what to do with the space. I searched the forum, and came up empty. I'm looking for ideas on a door, hatch, or fiddleboard. My current thought is to make a surface-mount door out of wood hinged at the bottom with a latch at the top. The door would be slightly larger than the opening rather than fit within the opening like the door beneath the sink. That would be a lot easier to fabricate. I'm thinking of a plain recessed panel.
Ideas, suggestions, photos?
I've been lusting after the storage space of that compartment. So we've removed the microwave and now the question is what to do with the space. I searched the forum, and came up empty. I'm looking for ideas on a door, hatch, or fiddleboard. My current thought is to make a surface-mount door out of wood hinged at the bottom with a latch at the top. The door would be slightly larger than the opening rather than fit within the opening like the door beneath the sink. That would be a lot easier to fabricate. I'm thinking of a plain recessed panel.
Ideas, suggestions, photos?
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Microwave cabinet
Personally, while I agree the overlapping door would be easier to make, if I'm adding something like that I'd want it to look like it was original. So I'd try and mimic the look of your existing cabinets. JMHO.
If you do go that route I'd make a strap to keep it from swinging down too far and whacking into items below.
What do you want to store there? Does it need a door? Could you do the acrylic sliding panels like the other cabinets? (I'm assuming these existed on the '95s. Our '97 had them)
If you do go that route I'd make a strap to keep it from swinging down too far and whacking into items below.
What do you want to store there? Does it need a door? Could you do the acrylic sliding panels like the other cabinets? (I'm assuming these existed on the '95s. Our '97 had them)
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Microwave cabinet
I'm not sure yet what I want to store there. Probably dishes and frequently-used food. I'm going to experiment with a large basket in the space to see what works. I have a fantasy that a large basket wouldn't fall out. Until it does, of course.
Sliding doors are an obvious choice, but I don't like them because you can only access half the area at a time. Swinging, fitted doors would probably be best.
Sliding doors are an obvious choice, but I don't like them because you can only access half the area at a time. Swinging, fitted doors would probably be best.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Microwave cabinet
You could put a small lip, say a 3/8" piece of teak, on the lower edge to keep the basket from sliding out.Nancy wrote:I'm not sure yet what I want to store there. Probably dishes and frequently-used food. I'm going to experiment with a large basket in the space to see what works. I have a fantasy that a large basket wouldn't fall out. Until it does, of course.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Microwave cabinet
When I was chasing down a leak a couple seasons ago I had the microwave out for a month or so and found that space to be quite useful, especially with the outlet there. There is already a starboard strip along the front edge that secures the microwave. Lay down a rubbery sheet of drawer liner and between that and the existing strip I do not think your basket will move. I like the basket idea. We use wicker baskets on the forward ledge for all cooking supplies, dishes etc., Very handy, accessible, etc. Pottery Barn has an excellent selection, just don't tell them it's for a boat or there may be a 50% surcharge
The microwave went back on for us, my first mate does quite the cooking aboard, no Hot Pockets (sorry Matt) or Chef Boyardee (sorry Doug) on my boat!
The microwave went back on for us, my first mate does quite the cooking aboard, no Hot Pockets (sorry Matt) or Chef Boyardee (sorry Doug) on my boat!
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
- DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Microwave cabinet
That's just mean man...just mean...RobS wrote: The microwave went back on for us, my first mate does quite the cooking aboard, no Hot Pockets (sorry Matt) or Chef Boyardee (sorry Doug) on my boat!
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Microwave cabinet
Pottery Barn?! How about the Dollar Store? lol!
Do you have a generator? Or do you do a lot of cooking at the dock? I've been known to do a fair amount of cooking on board, but it rarely involves a microwave. I'm partial to the stove and the barbecue grill. No Hotpockets or Chef Boyardee for us either.
Our cabinet has the air conditioner controls installed on the left side. We've secured the wires for the moment with electrical tape. I took this photo the first time I pulled the microwave to see what the opening looked like:
I had a basket on board that I stuck in there to get an idea of the possibilities. Maybe this isn't quite the right basket, but it's a start.
Our cleats have cut-outs for the microwave feet, so not ideal, but probably good enough until we figure out what we really want. We might also be able to use the cleat from the top of the cabinet after cleaning or sanding off the nasty rust stains.
Our boat has a cupboard forward of the dinette. It holds an amazing amount of stuff: pots & pans, clothes, extension cords, vacuum cleaner, handheld spotlight, spare parts, etc.
Do you have a generator? Or do you do a lot of cooking at the dock? I've been known to do a fair amount of cooking on board, but it rarely involves a microwave. I'm partial to the stove and the barbecue grill. No Hotpockets or Chef Boyardee for us either.
Our cabinet has the air conditioner controls installed on the left side. We've secured the wires for the moment with electrical tape. I took this photo the first time I pulled the microwave to see what the opening looked like:
I had a basket on board that I stuck in there to get an idea of the possibilities. Maybe this isn't quite the right basket, but it's a start.
Our cleats have cut-outs for the microwave feet, so not ideal, but probably good enough until we figure out what we really want. We might also be able to use the cleat from the top of the cabinet after cleaning or sanding off the nasty rust stains.
Our boat has a cupboard forward of the dinette. It holds an amazing amount of stuff: pots & pans, clothes, extension cords, vacuum cleaner, handheld spotlight, spare parts, etc.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Microwave cabinet
That's exactly what my wife said when I bought those 2 baskets. She looked for a week or 2 and could not find what she wanted, I found those in 1 night. She said well of course I knew PB would have them but I was trying to find something a little cheaper. I said hey I'm used to geting raped in the marine industry, PB was like they were giving it away!!Nancy wrote:Pottery Barn?! How about the Dollar Store? lol!
I bring the Honda genny on our annual 1-1/2 to 2 week trip but it barely gets used, it's more of a pc of mind thing to have aboard since most of the trip is on the hook/moorings. Mostly the butane burner and the magnum grill here too. This summer we kept the boat in a vacation area for the month of Aug and lived aboard 4 days a week so the micro was used more than usual. Microwave popcorn and netflix on the iPad was enjoyed regularly by the the kids. But jiffy pop on the burner has worked too. Our trips used to always include transient dockage so the micro seemed to get used regularly but the last couple seasons we have brought the dinghy along so rarely do we get a slip now. The micro would certainly be the first to go over the burner or grill.
I have seen the boats with that fwd cabinet and wondered if it was more of a constraint with storage rather than the big open ledge but it sounds like it works out real well. It probably keeps the cabin neater looking.
BTW, do you use your boat or just clean it, modify it and improve it , let's see some cruising and/or fishing reports & pics
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 107
- Joined: Sat May 19, 2007 2:14 pm
- Location: Riverside, RI
Re: Microwave cabinet
I'm going to pull my microwave this winter as it has never been used in the entire time I've owned the boat. Still working on ideas for the space but I like the baskets.
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Microwave cabinet
I recall reading prior threads where a new replacement microwave of proper dimensions for that opening was not easy to find. So don't discard these units being pulled out they may be in demand.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
Re: Microwave cabinet
Nancy, I have a Formula currently and the hinge their doors on top with a locking lift guide and a catch at the bottom. If you decide to put a door on I would do that because the weight of the door keeps it closed and the lock holds it open then a quick raise and it releases to close and stay latched firmly. The doors also overlap the frame. I hope this helps. Tim
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
Re: Microwave cabinet
Great idea Rob. Let's get those old microwaves in the For Sale forum.RobS wrote:I recall reading prior threads where a new replacement microwave of proper dimensions for that opening was not easy to find. So don't discard these units being pulled out they may be in demand.
Thanks!
John
Former - 28 TE Convertible"Afterglow"
Former - 28 TE Convertible"Afterglow"
-
- Mate
- Posts: 15
- Joined: Wed Jun 20, 2012 12:10 pm
- Home Port: Camden, ME
Re: Microwave cabinet
This discussion has made me wonder what would be needed, short of a generator, to be able to use the microwave on our 28TE away from shore power. I assume another battery, bigger alternator, and an inverter. Anyone gone this way? That would be pretty expensive popcorn.
Thanks,
D. Gideon
28TE
Camden, me.
Thanks,
D. Gideon
28TE
Camden, me.
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
Re: Microwave cabinet
We have run our microwave via the inverter a couple times for popcorn, to heat water. It works but I'll bet it'll kill a battery quick.D.Gideon wrote:This discussion has made me wonder what would be needed, short of a generator, to be able to use the microwave on our 28TE away from shore power. I assume another battery, bigger alternator, and an inverter. Anyone gone this way? That would be pretty expensive popcorn.
Thanks,
D. Gideon
28TE
Camden, me.
John
Former - 28 TE Convertible"Afterglow"
Former - 28 TE Convertible"Afterglow"
-
- Gold Member
- Posts: 1908
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Microwave cabinet
It would be a lot more efficient to make popcorn the old-fashioned way - in a little oil in a pot on the butane stove!
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987