• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Damper plate

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
User avatar
johnvb1014
First Mate
First Mate
Posts: 46
Joined: Thu Sep 23, 2010 1:35 pm
Home Port: Wilson NY

Damper plate

Post by johnvb1014 »

I have a Nissan diesel (ld28m) with a Hurth 250 transmission and am seeking a new damper plate. Have searched many web sites and have had a boat mechanic contacting his suppliers and cannot find one. Thought a newer design with three fingers instead of disc would work but bolt holes don't match.

Does anyone out there have one? Would consider used plate if in good condition.

Thanks

John VB
Top
User avatar
DougSea
Gold Member
Gold Member
Posts: 2762
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Damper plate

Post by DougSea »

Have you contacted (or posted) here: http://nissandiesel.dyndns.org/viewtopi ... c8fc8fdfa5

This post is from a while ago but there's a phone number and a website.

Good luck!!
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Top
User avatar
meridian
First Mate
First Mate
Posts: 112
Joined: Wed Sep 21, 2011 9:00 pm
Home Port: Looper

Re: Damper plate

Post by meridian »

I've seen universal plates, you may want to check one out to see if they have the hole pattern you need.
-------------------------------
Terry
Top
Post Reply

Return to “Albin Maintenance”