• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replacement Windscreen Suggestion(s)???
- mdudley221
- Gold Member
- Posts: 15
- Joined: Wed Dec 07, 2011 2:17 pm
- Home Port: Hales Bar, TN
- Location: TN
Replacement Windscreen Suggestion(s)???
Any suggestions on replacing the windscreen, up on the flybridge, on 37' Palm Beach model? Thanks.
37' Palm Beach - 1985
-
- Gold Member
- Posts: 102
- Joined: Sat Apr 04, 2009 8:13 am
- Home Port: Avalon, NJ
Re: Replacement Windscreen Suggestion(s)???
not sure of your setup...mine is bolted to the frame/handrail and is slotted into the teak coaming. I plan on using smoked, 1/8 inch lexan based on the recommendton of mylocal glass guy. There are more scratch resistant plastics out there but are a lot more expensive and scratches in this application are less likely and if they happen not a big deal to me.
Scott Neeld
Albin 40 Trawler
Albin 40 Trawler
- mdudley221
- Gold Member
- Posts: 15
- Joined: Wed Dec 07, 2011 2:17 pm
- Home Port: Hales Bar, TN
- Location: TN
Re: Replacement Windscreen Suggestion(s)???
Thanks, Scott. I should have posted a picture (although, I don't know how, yet) but a similar picture is on the Yachtcouncil.com at http://www.yachtcouncil.com/media/image ... dge_1_.jpg.
The plastic would be bolted to each upright.
Thanks, M
The plastic would be bolted to each upright.
Thanks, M
37' Palm Beach - 1985