• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Fuel Level Sight Tubes
-
- Gold Member
- Posts: 38
- Joined: Tue Apr 10, 2012 7:27 am
- Home Port: Baycrest Marina, Big Island, Ontario
- Location: Green Turtle Cay, Bahamas
Fuel Level Sight Tubes
Good Morning:
I have a 82 Classic DC with two original fuel tanks - on each tank there is a vertical braided hose that indicates by sight the fuel levels in the tanks - these have become brown over the years and are now too dark so see through.
Question:
Has anyone replaced these ? If so what type of hose was used and where was it sourced?
And finally what is the diameter of the hose - save cutting a chunk out to take with me.
Thanks a lot
Grant
I have a 82 Classic DC with two original fuel tanks - on each tank there is a vertical braided hose that indicates by sight the fuel levels in the tanks - these have become brown over the years and are now too dark so see through.
Question:
Has anyone replaced these ? If so what type of hose was used and where was it sourced?
And finally what is the diameter of the hose - save cutting a chunk out to take with me.
Thanks a lot
Grant
A black cat crossing your path signifies that the animal is going somewhere.
Groucho Marx
Groucho Marx
-
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: Fuel Level Sight Tubes
Don't know the id..suspect 1/2 ". Tygon tubing from McMaster -Carr online will work.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
-
- Gold Member
- Posts: 38
- Joined: Tue Apr 10, 2012 7:27 am
- Home Port: Baycrest Marina, Big Island, Ontario
- Location: Green Turtle Cay, Bahamas
Re: Fuel Level Sight Tubes
Thanks a lot - much appreciated
A black cat crossing your path signifies that the animal is going somewhere.
Groucho Marx
Groucho Marx
-
- Gold Member
- Posts: 38
- Joined: Tue Apr 10, 2012 7:27 am
- Home Port: Baycrest Marina, Big Island, Ontario
- Location: Green Turtle Cay, Bahamas
Re: Fuel Level Sight Tubes
Just visited the site there is a yellow tint Tygon that is perfect - that's an amazing supplier thanks so much
A black cat crossing your path signifies that the animal is going somewhere.
Groucho Marx
Groucho Marx
-
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: Fuel Level Sight Tubes
Yes, I buy a lot from McMaster actually. I even bought spare stainless nuts and key stock for the prop shaft there....at a fraction of a marine price.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
- rebuckley
- Gold Member
- Posts: 254
- Joined: Wed Sep 22, 2010 12:38 pm
- Home Port: Westerly, RI (WYC)
- Location: East Lyme, CT
Re: Fuel Level Sight Tubes
Hi - did the 1/2"-id work out? I was looking to change these tubes as well (same discoloration issue). I am also changing out the antiquated Fuel/water seperator we had. When you changed the sight tubes - any fuel leak issues - or was simply closing the valves enough to keep the fuel at bay?
Reb Buckley
36' 1983 Classic (Au Naturel)
15' Guardian Whaler
Westerly, RI (WYC)
36' 1983 Classic (Au Naturel)
15' Guardian Whaler
Westerly, RI (WYC)
-
- Gold Member
- Posts: 102
- Joined: Sat Apr 04, 2009 8:13 am
- Home Port: Avalon, NJ
Re: Fuel Level Sight Tubes
I used cheapo clear, non-reinforced vinyl tube from the local hardware store....yes the fuel stays put except for what's in the tube. Take the top off first and let it spilll into a small container.
Same tubing as on my water tanks.
Same tubing as on my water tanks.
Scott Neeld
Albin 40 Trawler
Albin 40 Trawler
-
- Gold Member
- Posts: 215
- Joined: Tue Aug 15, 2006 8:56 pm
- Location: Tampa Bay
Re: Fuel Level Sight Tubes
Scott:
Heads up - check out the specs of the "non-reinforced vinyl tube" for its compatibility with diesel fuel. As a short term trouble shooting technique that type of tubing may work fine. But for a long term installation I would have second thoughts...
Also, another consideration is how hot does your diesel tank fuel get. In my case, being in Tampa Bay, a combination of ambient air, sea water and engine return fuel temperatures, I see my fuel supply out of the Racor to the engine reaching greater than 104 F. This hot fuel impacts engine performance with a reduction of RPMs at the same throttle setting. Hot fuel will impact vinyl...
Hope this helps,
Heads up - check out the specs of the "non-reinforced vinyl tube" for its compatibility with diesel fuel. As a short term trouble shooting technique that type of tubing may work fine. But for a long term installation I would have second thoughts...
Also, another consideration is how hot does your diesel tank fuel get. In my case, being in Tampa Bay, a combination of ambient air, sea water and engine return fuel temperatures, I see my fuel supply out of the Racor to the engine reaching greater than 104 F. This hot fuel impacts engine performance with a reduction of RPMs at the same throttle setting. Hot fuel will impact vinyl...
Hope this helps,
Joe
Albin Getaway
"LabTime"
Albin Getaway
"LabTime"
-
- Gold Member
- Posts: 38
- Joined: Tue Apr 10, 2012 7:27 am
- Home Port: Baycrest Marina, Big Island, Ontario
- Location: Green Turtle Cay, Bahamas
Re: Fuel Level Sight Tubes
Folks:
I used McMaster Carr part number 5187K74 - 7/16 ID - thick wall - specifically for diesel - it comes in 10 ft lengths and was more than enough.
The only issue I had was the "T" junction at the bottom of one tank was a 1/2" threaded connection so I went to the hardware store and purchased a reduction connector and it worked fine. The other tank was a perfect fit and I can see the fuel now.
Grant
I used McMaster Carr part number 5187K74 - 7/16 ID - thick wall - specifically for diesel - it comes in 10 ft lengths and was more than enough.
The only issue I had was the "T" junction at the bottom of one tank was a 1/2" threaded connection so I went to the hardware store and purchased a reduction connector and it worked fine. The other tank was a perfect fit and I can see the fuel now.
Grant
A black cat crossing your path signifies that the animal is going somewhere.
Groucho Marx
Groucho Marx
-
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: Fuel Level Sight Tubes
Yea, my fuel was so hot yesterday and I could only cruise at 6.8 knots instead of 6.9. I don't really think an old Ford Lehman will care.N4QC wrote: Also, another consideration is how hot does your diesel tank fuel get. In my case, being in Tampa Bay, a combination of ambient air, sea water and engine return fuel temperatures, I see my fuel supply out of the Racor to the engine reaching greater than 104 F. This hot fuel impacts engine performance with a reduction of RPMs at the same throttle setting. Hot fuel will impact vinyl...
Hope this helps,
Yes I'm being somewhat facecious, I know that on SOME engines it can make a difference.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
-
- Gold Member
- Posts: 102
- Joined: Sat Apr 04, 2009 8:13 am
- Home Port: Avalon, NJ
Re: Fuel Level Sight Tubes
I'm not worried...the tubes get replaced due to discoloration long before a failure...plus the valves are shut off when not actively taking a sight. Using more expensive, harder to see through hose in my opinion was just a waste of money.N4QC wrote:Scott:
Heads up - check out the specs of the "non-reinforced vinyl tube" for its compatibility with diesel fuel. As a short term trouble shooting technique that type of tubing may work fine. But for a long term installation I would have second thoughts...
Also, another consideration is how hot does your diesel tank fuel get. In my case, being in Tampa Bay, a combination of ambient air, sea water and engine return fuel temperatures, I see my fuel supply out of the Racor to the engine reaching greater than 104 F. This hot fuel impacts engine performance with a reduction of RPMs at the same throttle setting. Hot fuel will impact vinyl...
Hope this helps,
Scott Neeld
Albin 40 Trawler
Albin 40 Trawler
-
- Gold Member
- Posts: 246
- Joined: Wed Oct 13, 2010 7:15 pm
- Home Port: Warwick, RI
- Location: Warwick, RI
Re: Fuel Level Sight Tubes
Just went with Grant's recommendation and very happy with results. Thanks for the M-C source for tubing. Diesel rated and easy to work with.I'll use the leftovers to replace the sight tube on my water tank.
FWIW, just used the leftover tubing that fit perfectly on the water tank. Nice to see how much is in there without guessing. Also glad we don't use that water for drinking after seeing the inside of the old tubing, even though we have a water filter.
FWIW, just used the leftover tubing that fit perfectly on the water tank. Nice to see how much is in there without guessing. Also glad we don't use that water for drinking after seeing the inside of the old tubing, even though we have a water filter.
Mike and Sue Phillips
Warwick, RI
SUSAN HELENA 1985 40' Trawler
Warwick, RI
SUSAN HELENA 1985 40' Trawler