• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
photo tach
Moderator: Jeremyvmd
-
saltshaker28
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
photo tach
i bought a photo tach to check my beede tach on my 315 yanmar and the directions said to put a small piece of reflective tape that came with the tach and put it on a shaft my problem is i dont know where to put this tape because there is no shaft I can get to the only thing I can see is the pullys for the fan belts any info on where to put the tape on this laser tach?
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: photo tach
A little tight to get to on the engine box but certainly do-able. WEAR EAR PROTECTION
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
loubennett
- Gold Member
- Posts: 341
- Joined: Thu Jun 11, 2009 6:03 pm
- Home Port: Annapolis, MD
- Location: Annapolis, MD
Re: photo tach
When I had Quest surveyed, the surveyor used his phot tach on the front of the transmission. You just have to adjust the reading for the reduction ratio of the transmission. For my boat thta is 2:1, so the engine rpm is 2X the transmission rpm.
Lou Bennett
2002 Albin 28 TE
Quest
Annapolis
2002 Albin 28 TE
Quest
Annapolis
-
saltshaker28
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: photo tach
what about the pully for the fan belts ?
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: photo tach
Nope. You need to shoot the balancer on the crank pulley where my green arrow points. You won't have a problem..saltshaker28 wrote:what about the pully for the fan belts ?
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
saltshaker28
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: photo tach
I will give it a try tommrow