Rocket Launchers

[kowal_53]

Does anyone know if someone sells a set for my 2006 28 TE roof top?

[Capt Ron]

I'm not sure what you mean by "roof top" but I put six "Taco" clamp on rod holders on my 2000 TE arch. I used the aluminum models as they looked better on the aluminum arch. They also sell a stainless type.

[furball]

Pipe Dreams did mine. They have contact info on tidalfish.

http://www.tidalfish.com/forums/showthr ... s-and-More

Allen did a nice job on a custom 8 rod holder. The picture is on the bottom of his tidalfish page.

Good luck
John

[efishnsea]

Look on ebay. theres a fabricator by the name of jurassic carp that makes rocket launcher of stainless check it out. Bob

[waterhound]

I'm away from the boat right now - does anyone recall the actual size you can use on the arch? I see there's a 3/4-1" and another one that is 1 1/4 to 1 1/2... I can't remember..

[Robb]

http://www.fishmaster.com/products/rodholders.htm

Just installed 6 of these on my 96 TE and they fit the 1.9" arch tube perfectly. Swivel feature allows you to rotate the rod holders. Really nice product for $35/ea and it was hard to find a rodholder for this larger diameter pipe of the Albin arch.

[RobS]

Robb,
Thanks, looks to be a great find. I have 4 on my aluminum arch and have room for 2 more, these should work perfectly, especially with the swivel. I ordered 2 this morning. Easy website to get side-tracked on. Here's a better link than the one you posted http://www.fishmaster.com/girls/index.htm

[RobS]

I ordered 2 this morning...

And in under 2 hours I received a tracking number and an email advising that they were shipped.

[efishnsea]

Rocket launchers from Jurrasic Carp

[jcollins]

I ordered 2 this morning...

And in under 2 hours I received a tracking number and an email advising that they were shipped.

Here's a better link than the one you posted

I ordered two of those too!

[RobS]

2 of what?