Does anyone carry a spare prop for their A25 or A27? Looks pretty well protected but I am curious how to get one if needed and how much. Looks like Bronze so I expect they would be expensive. I think mine had been reworked by a shop a few years back so I am not sure how I would tell what the pitch etc is or if it is the original.
Iron Jack
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A25 prop?
-
leprof31
- Gold Member
- Posts: 81
- Joined: Fri Jul 24, 2009 1:53 pm
- Location: Trois-Rivieres, Quebec
Re: A25 prop?
17 X 14 for a A25 with a MD3B or MD17C...
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: A25 prop?
When a prop is re-worked it should be re-stamped by the shop. Don't worry about if it's original or not. What's important is that it is performing properly (WOT, speed, no vibration, cavitation, etc)glk34 wrote:..I think mine had been reworked by a shop a few years back so I am not sure how I would tell what the pitch etc is or if it is the original.
Iron Jack
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
glk34
- Gold Member
- Posts: 102
- Joined: Wed Aug 11, 2010 8:44 pm
- Home Port: Mactaquac New Brunswick Canada
- Location: Fredericton New Brunswick
Re: A25 prop?
Thanks Leprof, and Rob for the comments. I will check the prop for markings next time I haul her out. You are right Rob that it really doesn't matter about being original as long as it works well. I have no complaints on its performance but was just wondering about replacement cost etc. They look pretty expensive.
Iron Jack
Iron Jack
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: A25 prop?
Consignment shops, eBay, craiglist, google searches, etc and you should find one for a couple hundred. Shipping is only about $25 tops said you don't need to shop local..
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
dales
- Swabby
- Posts: 2
- Joined: Wed Dec 15, 2010 10:11 am
- Home Port: thunder bay
Re: A25 prop?
I have also been looking foe a prop for my albin 25 with a MD3B engine . Have you found a supplier.
Dale
Dale
-
Phoenix27
- Mate
- Posts: 11
- Joined: Fri Sep 30, 2011 11:32 pm
- Home Port: portsmouth va.
Re: A25 prop?
I have found a prop co.in china that will make a prop for you .the email address is www.gzpropellers.com the name of the co.is Guangzhou Freely Marine propeller Manufactory I am going to order a prop from them and it is going to cost $265 USD with shipping I hope that this can help you. Sincerely Herrendav