• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
oil sender
Moderator: Jeremyvmd
-
thirdrail
- Gold Member
- Posts: 17
- Joined: Sun Aug 30, 2009 9:02 pm
oil sender
Can anyone tell me what the correct yanmar # is for the oil sender for the oil pressure gage. Mine apparently has gone bad. Thanks
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: oil sender
For my 6LP-STE it is: 124060-39452
You should call Bay Shore Marine and tell them what model engine you have and what gauge you have and see what they come up with. http://www.bayshoremarineengines.com/Pages/contact.html
You should call Bay Shore Marine and tell them what model engine you have and what gauge you have and see what they come up with. http://www.bayshoremarineengines.com/Pages/contact.html
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
thirdrail
- Gold Member
- Posts: 17
- Joined: Sun Aug 30, 2009 9:02 pm
Re: oil sender
Thanks Rob, I will do that.