• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

zincs

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
special k
Gold Member
Gold Member
Posts: 315
Joined: Fri Mar 06, 2009 3:37 pm
Home Port: mystic
Location: tolland, ct

zincs

Post by special k »

on my 28te 6lpa yanmar i find the zinc on the front of the fresh water cooler inaccessable. i realize i am not very flexable but i just can't seem to reach this one. any suggestions????
zinbaad
Gold Member
Gold Member
Posts: 518
Joined: Mon Sep 29, 2008 10:39 am
Location: Western Long Island Sound
Contact:

Re: zincs

Post by zinbaad »

Finally go around to doing that one myself this year, tuff one, had to remove a hose & do 1/4 turns to get out the brass. Real SNUG fit getting the zinc & brass nut back in. Got stuck for a few minutes lying sideways in the starbord side ( Remembers someone said to bring down a cell phone just in case, lol) and of course I dropped the darn wrench down under but I finally got it done. Good luck
"MAHALO"
31 Tournament Edition
Hull#223 oop's
Twin 315's
Baysideanglers.com
Donya
Gold Member
Gold Member
Posts: 63
Joined: Mon Nov 13, 2006 8:45 am
Home Port: Bellingham
Location: Bellingham, WA

Re: zincs

Post by Donya »

I loosen the clamps and turn the cooler.... it makes it a little easier :?
Don and Taunya
2003 28TE -Dog On It-
Commodore Bellingham Wheel and Keel
Post Reply

Return to “Albin Maintenance”