• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Stancion/ cap rail screws

Post Reply
varmont
Deckhand
Deckhand
Posts: 6
Joined: Mon Apr 06, 2009 5:03 pm

Stancion/ cap rail screws

Post by varmont »

The screws that hold the hand rail stanchions to the caprail. I have several that are leaking. They have crevice corrosion and need to be replaced. I have tried to use #12 1 3/4" screws but the threading and the shaft are not the same as the original. All the screws I can find, the shaft diameter is consistent. The existing screws the shaft diameter tapers along the shank almost to the tip and then goes into a point. Plus the threading on the old screws is more threads than the screws I can find.

I am having a bugger of a time finding replacement screws - does anyone have a source?
Thanks
--Dave S
Post Reply

Return to “36/37/40/43”