• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
one thing about shore power...
one thing about shore power...
...it might fail, as it did at my marina the other night.
...
i leave the reefer on. i had been leaving the battery switch in 'both' when connected to shore power. this is not a good idea...
yep, both batteries died.
i found the main power switch at the dock. it was off for some reason. i turned it on and heard the bilge pumps on at least 5 other boats come on.
sooo... even with shore power connected, its probably best to have only the house battery selected if you want to leave the reefer (or some other load) on. the battery charger should still service both batteries.
...
it seems most things i learn, i learn the hard way.
...
i leave the reefer on. i had been leaving the battery switch in 'both' when connected to shore power. this is not a good idea...
yep, both batteries died.
i found the main power switch at the dock. it was off for some reason. i turned it on and heard the bilge pumps on at least 5 other boats come on.
sooo... even with shore power connected, its probably best to have only the house battery selected if you want to leave the reefer (or some other load) on. the battery charger should still service both batteries.
...
it seems most things i learn, i learn the hard way.
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
- chiefrcd
- Gold Member
- Posts: 541
- Joined: Mon Jun 19, 2006 10:29 am
- Home Port: Deltaville, VA
- Location: Deltaville Virginia
- Contact:
Yep, one of the issues here concerns using those electric boat heaters to prevent freezing. Lots of people do that and fail to winterize their boats. Then the power goes off in a big storm or someone throws the breakers and your boat freezes up. Everytime I leave the boat, I prepare that there will be no power on it at times....I minimize food in the fridg....keep just one battery on etc. I'm not sure how most marinas are but the electrical system in my marina was wired by Thomas Edison himself...
Albin 28TE "Southwind"
pretty sure the charger...
...charges both batteries with the batt switch off. the meter on the charger should verify that. its an a.c. load and should not be affected by the batt switch.
-
- In Memorium
- Posts: 182
- Joined: Fri Jun 16, 2006 8:20 am
- Home Port: St Michaels,Md.
- Location: Baltimore
battery, shore power and charger
I learn alot listening to all of you . I think i will alternate batteries for now on and i always wanted to know if it charged when off. Thanks
- Mariner
- Gold Member
- Posts: 1450
- Joined: Mon Apr 17, 2006 11:18 am
- Location: Gig Harbor, WA
Re: pretty sure the charger...
That all depends on the boat. Some are wired that way, some are not.tomcat rio wrote:...charges both batteries with the batt switch off. the meter on the charger should verify that. its an a.c. load and should not be affected by the batt switch.
Ours is.
just disconnect the batteries and...
...check for 12 vdc at the positive leads with the charger on and shore power connected.
then, cycle through '1','2'.'both' and 'off' and verify you still have 12 vdc on both positive leads...reconnect the batteries.
...
it seems to me the builders would really have to go out of their way to put the batt switch between the charger and the batteries.
...
as an aside, i read in one boating mag that wing nuts are no longer recommended to connect leads to batteries. use a nut and a wrench.
then, cycle through '1','2'.'both' and 'off' and verify you still have 12 vdc on both positive leads...reconnect the batteries.
...
it seems to me the builders would really have to go out of their way to put the batt switch between the charger and the batteries.
...
as an aside, i read in one boating mag that wing nuts are no longer recommended to connect leads to batteries. use a nut and a wrench.