I'm repairing / re fastening some of the curtain rod holders inside.
The screws used are only 1/4" and don't have much "bite".
By the specs on the window rubber in another thread here, it sounds like the FRP cabin thickness around the window areas is 3/16".
Is this correct? I don't want to use screws that are too long!!!
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 25' curtain rod holders
-
Brian
- Gold Member
- Posts: 82
- Joined: Tue Jan 12, 2010 7:38 pm
- Location: Halfmoon Bay, BC
- Contact:
-
leprof31
- Gold Member
- Posts: 81
- Joined: Fri Jul 24, 2009 1:53 pm
- Location: Trois-Rivieres, Quebec
Re: Albin 25' curtain rod holders
It is my understanding... You sould try making an Epoxy glue bed for the plastic holder...
You should get this information too:
You should get this information too:
You can get them from Watski as well (I bought 12 brackets last year, and they are exactly the same as the orginal) :
www.watski.no or www.watski.se
GARDINSTANG
Gardinstang i 10 mm aluminiumsrør. Lengde: 2,5 meter. Oppheng i hvit nylon.
69460-10
Stang
69460-11 Oppheng 1 stk.
69460-11-4 Oppheng i pk. 4 stk.
The following part number is a set of 4 curtain rod brackets:
69460-11-4 Oppheng i pk. 4 stk.
The following part number is the curtain rod:
69460-10
Stang
The following part number is one curtain rod bracket:
69460-11 Oppheng 1 stk.
Best regards/Mvh
Bjørn Lie