first off thanks for all the help
i was getting ready to put my motor back in and saw that a spot of ballast was gone !
so of course i picked at it and saw that it was all loose so took it out .
what should i use to put in new ? it was concrete that i took out .
is that what i should go back with and what kind!
thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
ballast on a 33 aft cabin
Moderator: Jeremyvmd