• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Rudder Repair
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 544
- Joined: Tue Apr 18, 2006 1:28 pm
- Location: Mystic, CT
Rudder Repair
Back in the spring I think, someone here had to remove the rudder and have the hole through the hull sleeved I think. Is anyone else on this site going to look at that fix now that most boats are on the hard? D.
Former Owner of
1994 28'TE
"Red Stripe"
1994 28'TE
"Red Stripe"
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact:
Re: Rudder Repair
Hi Denis,Denis wrote:Back in the spring I think, someone here had to remove the rudder and have the hole through the hull sleeved I think. Is anyone else on this site going to look at that fix now that most boats are on the hard? D.
That was chiefrcd. Here is the post. http://albinowners.net/aog/viewtopic.ph ... eak#p10339
I'm going to take a good look at mine this year. I hope I don't have to go any further.
John
Former - 28 TE Convertible"Afterglow"
Former - 28 TE Convertible"Afterglow"
-
- Gold Member
- Posts: 544
- Joined: Tue Apr 18, 2006 1:28 pm
- Location: Mystic, CT
Re: Rudder Repair
John, thanks for showing me that thread again. D.
Former Owner of
1994 28'TE
"Red Stripe"
1994 28'TE
"Red Stripe"